Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green SODIMM modules, no heat spreaders, 260-pin DDR4

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX RT-6115

SKU CH-P83Q-PME0A

A 16 GB DDR4 SODIMM kit running at 2400 MHz CL17 for the POSIFLEX RT-6115 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 2400 CL17 timing matches POSIFLEX RT-6115 spec
  • 2V low-voltage modules reduce system power draw
  • Major-brand Samsung, Micron or Hynix ICs ensure reliability
  • 260-pin SODIMM form factor fits the terminal slot

POSIFLEX RT-6115 memory kit

This 16GB kit contains two 8GB DDR4 2400 SODIMM modules built for the POSIFLEX RT-6115 terminal. It runs at 1.2V with CL17 latency and uses 260-pin unbuffered non-ECC chips. The kit targets retailers and integrators who need a direct-fit upgrade for that specific point-of-sale platform.

Replacing factory 8GB or 4GB modules

The jump is worth it when the terminal runs multiple POS applications, browser tabs or local databases that push the original memory past capacity. Adding this matched pair restores headroom without requiring BIOS changes or voltage adjustments. It is not for systems that already run 16GB or more, or for any platform other than the named terminal.

Sustained load behaviour

Modules are stress tested under load before shipping, using major OEM Samsung, Micron or Hynix ICs rated 2Rx8. Without a heat spreader, they rely on the terminal's internal airflow, which is sufficient for typical POS workloads that stay well below continuous maximum bandwidth. Extended compile jobs or virtualisation workloads may thermal-throttle faster than spreader-equipped alternatives.

Points forts

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 2400 CL17 timing matches POSIFLEX RT-6115 spec
  • 2V low-voltage modules reduce system power draw
  • Major-brand Samsung, Micron or Hynix ICs ensure reliability
  • 260-pin SODIMM form factor fits the terminal slot

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

Does the 260-pin SODIMM form factor fit the POSIFLEX RT-6115 terminal?

Yes, the kit uses 260-pin DDR4 SODIMM modules designed for the POSIFLEX RT-6115 Stylish Slim Terminal.

How do I install the 2Rx8 modules correctly?

Power off the terminal, open the memory compartment, align the notch on each 2Rx8 SODIMM with the slot key, insert at an angle, then press down until the retention clips click.

Will the CL17 DDR4 2400 modules need a firmware update later?

No firmware updates are required for the memory itself; the modules run at 1.20 V with standard JEDEC timings and have no moving parts to service.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.