NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-Pin UDIMM Desktop RAM
A 16 GB dual-channel DDR4 kit running at 3200 MT/s with CL22 latency and 1.2 V operation
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 16 GB dual-channel kit doubles bandwidth for multitasking
- DDR4 3200 speed feeds data at PC4-25600 rates
- CL22 latency keeps response tight under load
- 20 V operation reduces power draw and heat
- Tested for ASUS WS X299 PRO, X99-WS/IPMI, WS Z390 PRO
16 GB DDR4 desktop kit
This 16 GB kit contains two 8 GB DDR4 UDIMM modules for desktop workstations and compatible motherboards. It targets system builders and IT professionals who need reliable memory upgrades for supported platforms.
CL22 latency at 3200 MT/s
The kit operates at DDR4 3200 with a CAS latency of CL22 and a voltage of 1.20 V. This timing and voltage combination is the primary specification that determines compatibility with the qualified motherboard list.
Unbuffered non-ECC stability
Each module uses 1Rx8 unbuffered non-ECC DRAM from major OEM suppliers and is stress tested under sustained load. The design prioritises data integrity and long-term reliability for continuous workloads.
Points forts
- 16 GB dual-channel kit doubles bandwidth for multitasking
- DDR4 3200 speed feeds data at PC4-25600 rates
- CL22 latency keeps response tight under load
- 20 V operation reduces power draw and heat
- Tested for ASUS WS X299 PRO, X99-WS/IPMI, WS Z390 PRO
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Series Server Motherboard Memory |
| Model | ASUS Compatible DDR4 3200MHZ Non-ECC UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC UDIMM Motherboard Compatible |
Questions sur cet article
Will this kit work in my ASUS WS X299 PRO motherboard?
The kit is listed as compatible with the ASUS WS X299 PRO and uses standard DDR4 3200 UDIMM modules that fit 288-pin desktop slots.
Do I need to enable XMP or change BIOS settings to reach 3200 MHz?
The modules run at 1.20 V with CL22 timings; most boards will apply these speeds automatically, but you can verify the profile in BIOS if needed.
Can I add this 16 GB kit alongside my existing 8 GB DDR4 sticks?
Mixing kits of different ranks or timings can cause instability; for best results use identical modules or consult the motherboard manual for supported configurations.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



