Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 ECC RDIMM CL15 1.2V 288-pin memory upgrade

SKU CH-7KKS-F177W

A 16 GB DDR4 2133 ECC registered DIMM running at 1.2 V with CL15 latency for server memory upgrades

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 ECC RDIMM protects server data integrity
  • Registered 1Rx4 design stabilises heavy workloads
  • CL15 latency at 2133 MT/s speeds response
  • 2V operation reduces power draw per module
  • 288-pin form factor fits compatible DDR4 slots

16GB DDR4 ECC Registered Module

This 16GB DDR4 2133MHz ECC RDIMM provides registered memory for server and workstation platforms. It operates at 1.2V with a CL15 latency and uses a 1Rx4 Hynix chip organisation. The 288-pin module is designed for systems requiring error-correcting code and registered buffering.

Upgrade from non-ECC or unbuffered memory

This module replaces standard unbuffered or non-ECC DIMMs when data integrity and signal stability are required. The jump is worth it for workloads that cannot tolerate silent data corruption or for motherboards that mandate registered modules. It steps up from lower-capacity registered sticks to a single 16GB rank.

Fits DDR4 RDIMM slots in compatible servers

The 288-pin form factor installs directly into DDR4 RDIMM slots on qualified Hynix-compatible server or workstation motherboards. Registered buffering reduces electrical load on the memory controller, freeing headroom for additional modules. No heat spreader is fitted, so airflow across the PCB is unimpeded.

Points forts

  • 16GB DDR4 ECC RDIMM protects server data integrity
  • Registered 1Rx4 design stabilises heavy workloads
  • CL15 latency at 2133 MT/s speeds response
  • 2V operation reduces power draw per module
  • 288-pin form factor fits compatible DDR4 slots

Caractéristiques

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC RDIMM Registered Server Memory
Part NumberMR17000-614K1
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory

Questions sur cet article

Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?

Yes, the module uses the 288-pin DDR4 RDIMM form factor that matches standard registered server DIMM slots.

What is the correct orientation step when seating the 1Rx4 registered module?

Align the off-centre notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the module sits evenly.

Will the 1.2 V CL15 ECC RDIMM require any firmware update or battery replacement over time?

No firmware or battery maintenance is needed; the DRAM operates at 1.2 V with on-die ECC, and the module has no onboard power source.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.