Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green bare circuit board DDR4 UDIMM memory module

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 288-Pin UDIMM ASRock B660M memory upgrade

SKU CH-A6MK-18S3G

16GB DDR4 3200 CL22 1.2V 2Rx8 288-Pin UDIMM for ASRock B660M motherboards

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4-3200 module boosts desktop responsiveness
  • CL22 latency at 1.2 V balances speed with efficiency
  • 2Rx8 dual-rank layout increases memory density per slot
  • 288-pin UDIMM fits ASRock B660M series motherboards
  • Tested with Samsung, Micron or Hynix chips for stability

16GB DDR4 module for ASRock B660M boards

This 288-pin UDIMM delivers 16GB of non-ECC unbuffered memory built specifically for ASRock B660M motherboards including PG Riptide Phantom Gaming 4 Pro RS and ProRS models. It installs in a single slot and operates at the standard 1.20V DDR4 voltage.

Runs at DDR4 3200 with CL22 latency

The module is rated PC4-25600 at 3200MT/s with a CAS latency of 22 cycles. Its 2Rx8 rank organisation and Samsung Micron or Hynix chips are validated for stability on the target platform.

Fits a single DIMM slot on compatible boards

The stick requires an open 288-pin DDR4 slot and a motherboard that supports unbuffered non-ECC UDIMMs at 1.20V. It leaves remaining slots free for additional capacity and does not need a heat spreader or extra clearance.

Points forts

  • 16 GB DDR4-3200 module boosts desktop responsiveness
  • CL22 latency at 1.2 V balances speed with efficiency
  • 2Rx8 dual-rank layout increases memory density per slot
  • 288-pin UDIMM fits ASRock B660M series motherboards
  • Tested with Samsung, Micron or Hynix chips for stability

Caractéristiques

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions sur cet article

What does the 3200 MT/s rating mean once the module is installed in an ASRock B660M board?

The board will run the stick at DDR4 3200 with CL22 timings at 1.2 V, delivering PC4-25600 bandwidth without manual tuning.

How does the DDR4 UDIMM interface limit the usable speed on this platform?

The 288-pin unbuffered DDR4 slot caps transfer rate at 3200 MT/s, so the module operates at its rated ceiling without overclocking.

Will the 288-pin stick fit the four DIMM slots on my B660M Pro RS?

Yes, the standard 288-pin UDIMM form factor matches the four DDR4 slots on all listed ASRock B660M models.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.