Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM for POSIFLEX RT-6016-G2 memory upgrade

SKU CH-687B-HD0M0

16 GB DDR4-3200 CL22 SODIMM module upgrades POSIFLEX RT-6016-G2 terminals with 1.2 V, 2Rx8 unbuffered memory

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 boosts terminal responsiveness
  • CL22 latency and 1.2 V keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits the RT-6016-G2 slot
  • Major OEM Samsung, Micron, Hynix chips deliver reliable operation
  • Non-ECC unbuffered design matches POS system requirements

NEMIX RAM 16GB DDR4 SODIMM for POSIFLEX RT-6016-G2

This 16GB DDR4 3200 SODIMM is built specifically for the POSIFLEX RT-6016-G2 terminal. It runs at 1.2V with CL22 latency and uses a 2Rx8 rank configuration on a 260-pin unbuffered module. The part number MS25600-628K1 confirms exact compatibility.

Who this suits and who should look elsewhere

Technicians upgrading a POSIFLEX RT-6016-G2 terminal will find the correct form factor and validated timings in this single module. Buyers who need ECC error correction, registered buffering, a different voltage, or a higher capacity per slot cannot use this part.

The specification that decides fit

The module must be a 260-pin DDR4 SODIMM rated for PC4-25600 at 1.2V with CL22 CAS latency. If the target system requires a different pin count, voltage, speed grade, or latency, this memory will not function correctly.

Points forts

  • 16 GB DDR4 3200 boosts terminal responsiveness
  • CL22 latency and 1.2 V keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits the RT-6016-G2 slot
  • Major OEM Samsung, Micron, Hynix chips deliver reliable operation
  • Non-ECC unbuffered design matches POS system requirements

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How can I confirm the 16 GB DDR4 3200 module is running at CL22 after installation?

Open Task Manager, select the Performance tab, click Memory and verify the speed shows 3200 MHz; then use CPU-Z or HWiNFO to check that the CAS latency reads 22 cycles.

What is included in the package and what extra parts are required?

The box contains one 16 GB 260-pin DDR4 SODIMM (part MS25600-628K1); no tools, cables or additional modules are needed for the POSIFLEX RT-6016-G2 slot.

Which version should I choose for the POSIFLEX RT-6016-G2 terminal?

Select the 16 GB DDR4 3200 CL22 260-pin SODIMM (MS25600-628K1) — it matches the terminal’s voltage, rank and pin layout exactly.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.