Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board SODIMM module with black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX EK-2450 memory upgrade

SKU CH-HBHE-JQV8V

16 GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2450 kiosks with CL22 latency

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency and 1.2 V operation keep power draw low
  • 2Rx8 dual-rank layout maximises memory density per slot
  • 260-pin SODIMM form factor fits POSIFLEX EK-2450 kiosks directly
  • Rigorous stress testing validates stability for mission-critical retail workloads

POSIFLEX EK-2450 compatible SODIMM

This 16 GB DDR4 module is built for the POSIFLEX EK-2450 Mercury Series kiosk. It fits systems that accept 260-pin SODIMMs and require non-ECC unbuffered memory. The stick is validated for point-of-sale workloads where stability matters more than raw speed. Buyers needing ECC or registered DIMMs should look elsewhere.

DDR4 3200 CL22 interface limits

The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles at 1.20 V. Bandwidth and latency are fixed by the JEDEC standard for this speed grade; no XMP or manual overclock profiles are offered. Systems that demand lower latency or higher frequency than the base specification will not gain from this part.

16 GB single-rank capacity decision

Capacity is 16 GB in a single 2Rx8 SODIMM. If the kiosk motherboard has only one slot, this fills it completely; if it has two, a second identical module can be added later. Buyers who want more than 16 GB per slot or who need a dual-rank kit in one package cannot use this module.

Points forts

  • 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency and 1.2 V operation keep power draw low
  • 2Rx8 dual-rank layout maximises memory density per slot
  • 260-pin SODIMM form factor fits POSIFLEX EK-2450 kiosks directly
  • Rigorous stress testing validates stability for mission-critical retail workloads

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

Should I pick the single 16 GB module or add a second stick for dual-channel on the POSIFLEX EK-2450?

The kit is a single 16 GB SODIMM; adding a second identical module will enable dual-channel bandwidth on the POSIFLEX EK-2450.

What does the 3200 MT/s rating deliver once the module is installed in the kiosk?

The DDR4 3200 module runs at up to 3200 MT/s (PC4-25600) with CL22 latency at 1.2 V, matching the platform's supported speed.

Will the 260-pin SODIMM fit the POSIFLEX EK-2450 memory slot and what does the interface limit?

Yes, the 260-pin DDR4 SODIMM is the correct form factor for the POSIFLEX EK-2450; the DDR4 interface caps transfer rate at the rated 3200 MT/s.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.