Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL38 1Rx8 1.1V UDIMM SuperMicro MBD-C9Z790-CGW memory upgrade

SKU CH-GGXB-6RA7H

16 GB DDR5 module running at 5200 MHz with CL38 latency for SuperMicro MBD-C9Z790-CGW workstations

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB capacity expands system memory for heavy workloads
  • DDR5 5200 MT/s speed raises data throughput for demanding tasks
  • CL38 latency supports responsive operation under load
  • 1 V operation reduces power draw and heat output
  • Validated for Supermicro MBD-C9Z790-CGW motherboard compatibility

Capacity and Compatibility

This 16GB DDR5 UDIMM is built for the SuperMicro MBD-C9Z790-CGW motherboard. It operates at 5200MHz with a CAS latency of 38 and runs at 1.10V. The module uses a 1Rx8 unbuffered non-ECC design. It fits standard 288-pin desktop memory slots.

Suitable Builders and Limitations

This upgrade suits owners of the named SuperMicro board who need a single 16GB DDR5 module. It is not ECC memory, so it will not provide error correction for data-integrity workloads. The stick has no heat spreader, which may limit sustained performance in poorly ventilated chassis. Builders needing registered DIMMs or higher capacities per slot should look elsewhere.

Deciding Specification

The CAS latency is CL38 at the rated 5200MHz speed, which determines how quickly the memory responds to read commands. The module runs at the standard DDR5 voltage of 1.10V without requiring manual adjustment. Verify that your motherboard firmware supports this timing profile before purchase.

Points forts

  • 16 GB capacity expands system memory for heavy workloads
  • DDR5 5200 MT/s speed raises data throughput for demanding tasks
  • CL38 latency supports responsive operation under load
  • 1 V operation reduces power draw and heat output
  • Validated for Supermicro MBD-C9Z790-CGW motherboard compatibility

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What speed and latency does this DDR5 5200 module run at?

It operates at DDR5 5200 (PC5-41600) with a CAS latency of CL38; the supplier title also lists CL44 for the same part.

Will this 288-pin UDIMM fit the SuperMicro MBD-C9Z790-CGW motherboard?

Yes — the 288-pin DDR5 UDIMM form factor matches the desktop DIMM slots on the MBD-C9Z790-CGW board.

How do I install the module and what step is often missed?

Power off, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both retention clips click; the step often missed is fully seating both ends so the clips engage.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.