BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $US
0.0028064BTC
En stock
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V 288-pin UDIMM Dell Pro Max Slim memory upgrade
16 GB DDR5 UDIMM running at 5600 MHz with CL46 latency for Dell Pro Max Slim desktops
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB capacity lifts multitasking headroom
- DDR5 5600 speed accelerates data throughput
- CL46 latency keeps response tight
- 1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Slim
Dell Pro Max Slim DDR5 Upgrade
This 16 GB DDR5 module is built for the Dell Pro Max Slim desktop and installs in a standard 288-pin UDIMM slot. It targets owners of that system who need more memory for everyday workloads without changing platforms. The single-rank 1Rx8 layout keeps the electrical load light on the memory controller.
Low-Voltage Operation at 1.1 V
Running at 1.10 V, the stick draws minimal power and produces little heat during normal desktop use. No heat spreader is fitted, so airflow from the chassis fans passes directly over the DRAM packages. The CL46 latency at 5600 MT/s is the standard JEDEC timing for this voltage class.
Single Slot, Non-ECC Unbuffered Design
The unbuffered, non-ECC design plugs straight into the motherboard without extra registers or error-correction circuitry. One module occupies a single DIMM slot, leaving any remaining slots free for future expansion. Compatibility is limited to the Dell Pro Max Slim desktop as specified by the supplier.
Points forts
- 16 GB capacity lifts multitasking headroom
- DDR5 5600 speed accelerates data throughput
- CL46 latency keeps response tight
- 1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Slim
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM |
Questions sur cet article
How do I install this 288-pin DDR5 UDIMM in a Dell Pro Max Slim, and what step is often missed?
Power off and unplug the PC, open the case, align the module notch with the slot key, press firmly until both retention clips click, then verify the firmware recognises the full 16 GB at 5600 MT/s — the step most often missed is seating the module fully so both clips engage.
What maintenance or replacement will this 1Rx8 CL46 module need over time?
No scheduled maintenance is required; keep interior dust-free and ensure airflow. If errors appear, run a memory diagnostic and replace the stick — DDR5 modules do not have user-serviceable parts.
What limit appears first on this 1.1 V DDR5 5600 stick during sustained heavy workloads?
The primary limit is thermal throttling; without a heat spreader the chips rely on case airflow, so prolonged loads may reduce clocks once the safe temperature threshold is reached.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $US
0.00283251BTC
En stock
