BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $US
0.00278972BTC
En stock
NEMIX RAM
NEMIX RAM 16GB DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Dell Pro Max Tower T2 memory upgrade
A 16 GB DDR5 desktop memory module running at 5600 MHz with CL46 latency and 1.1 V operation, built for Dell Pro Max Tower T2 systems
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB DDR5 5600 MHz boosts Dell Pro Max Tower T2 speed
- CL46 latency and 1.1 V operation cut power draw
- 288-pin UDIMM fits straight into the desktop motherboard
- Non-ECC unbuffered design keeps installation simple
- Samsung Micron Hynix chips deliver reliable enterprise-grade quality
Dell Pro Max Tower T2 DDR5 upgrade
This 16 GB DDR5 module is built specifically for the Dell Pro Max Tower T2 desktop. It runs at 5600 MHz with CL46 latency at 1.1 V using a single 1Rx8 rank. The 288-pin unbuffered UDIMM format matches the factory memory slots without adapters.
Suits owners adding capacity to a supported Dell
Builders who need ECC error correction, registered modules or a heat spreader should look elsewhere. The non-ECC unbuffered design does not meet server or workstation requirements that demand those features. Systems outside the Dell Pro Max Tower T2 line are not validated for this part.
Fits directly into an available UDIMM slot
No extra power cables or cooling hardware are required because the module operates at standard DDR5 voltage. Adding this stick increases total memory bandwidth for multitasking and leaves remaining slots open for further expansion.
Points forts
- 16 GB DDR5 5600 MHz boosts Dell Pro Max Tower T2 speed
- CL46 latency and 1.1 V operation cut power draw
- 288-pin UDIMM fits straight into the desktop motherboard
- Non-ECC unbuffered design keeps installation simple
- Samsung Micron Hynix chips deliver reliable enterprise-grade quality
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM |
Questions sur cet article
What motherboard slot is required for this 288-pin DDR5 UDIMM to work?
The module fits a standard 288-pin DDR5 UDIMM slot on a desktop motherboard that supports DDR5 5600MHz memory.
Will this 16GB DDR5 5600MHz CL46 stick run with slower DDR5 modules already in the Dell Pro Max Tower T2?
Yes, it will operate at the lowest common speed and timing of the installed modules, so mixing with slower DDR5 is possible but overall performance drops to that slower rate.
How can I verify the 1.1V CL46 5600MHz settings are active after installation?
Enter the system BIOS or use a utility such as CPU-Z to confirm the memory reports DDR5 5600MHz, CL46 latency and 1.1V voltage.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $US
0.00281568BTC
En stock
