BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $US
0.00276429BTC
En stock
NEMIX RAM
NEMIX RAM 192GB 12x16GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13SSH-E memory upgrade
A 192GB DDR5 5600 ECC RDIMM kit with twelve 16GB modules at 1.1V CL46 for the Supermicro H13SSH-E
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB total capacity from 12 matched 16 GB modules for full server population
- DDR5 5600 speed with CL46 latency runs at rated performance on the H13SSH-E
- Registered ECC architecture corrects single-bit errors and stabilises every populated slot
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSH-E without adapters
192GB DDR5 5600 ECC RDIMM kit
This 192GB kit contains twelve 16GB DDR5 5600 Registered ECC modules built for the Supermicro H13SSH-E motherboard. Each DIMM runs at 1.1V with CL46 timing and a 1Rx8 rank layout that matches the board's memory controller expectations. The 288-pin RDIMM form factor ensures correct physical and electrical fit.
Sustained enterprise workload stability
Registered buffering reduces electrical load on the memory controller so all twelve slots can stay fully populated at rated speed during continuous operation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots under heavy, long-running server workloads.
Supermicro H13SSH-E validated compatibility
The kit is validated specifically for the Supermicro H13SSH-E motherboard and its documented population rules. Systems requiring UDIMM, SODIMM, or a different DDR generation will not accept these modules, and boards with dissimilar population limits cannot use the full 192GB capacity.
Points forts
- 192 GB total capacity from 12 matched 16 GB modules for full server population
- DDR5 5600 speed with CL46 latency runs at rated performance on the H13SSH-E
- Registered ECC architecture corrects single-bit errors and stabilises every populated slot
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSH-E without adapters
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
How much heat does the 1.1V DDR5 RDIMM kit add to a server running all day?
The 1.1V operating voltage keeps power draw low per module, reducing thermal load when all twelve slots are populated continuously.
What motherboard must I already own for this 192GB kit to work?
A Supermicro H13SSH-E motherboard with twelve 288-pin DDR5 RDIMM slots populated in the order its manual specifies.
Will the CL46 5600MHz modules run at rated speed alongside slower DDR5 RDIMMs I keep installed?
The memory controller will down-clock every module to the speed of the slowest installed DIMM, so mixed speeds run at the lowest common rate.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $US
0.00279001BTC
En stock
