NEMIX RAM
NEMIX RAM 192GB (2 x 96GB) DDR5 6400 CL52 1.1V ECC Registered RDIMM memory upgrade
192 GB DDR5 6400 registered ECC kit (2 × 96 GB) validated for Supermicro H14DST-F motherboards
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB capacity from two 96 GB modules
- DDR5 6400 speed with CL52 latency
- 1 V registered ECC for server stability
- 288-pin RDIMM fits Supermicro H14DST-F
- Lifetime replacement warranty with US support
Exact-match upgrade for Supermicro H14DST-F
This 192GB kit contains two 96GB DDR5-6400 registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard's memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual tuning.
Sustained-load behaviour
Registered architecture offloads the memory controller so every slot runs fully populated at full capacity while ECC catches and corrects single-bit errors on the fly. The 1.1V operating voltage keeps power draw steady during continuous server workloads.
Installation and common issues
The 288-pin RDIMM form factor fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Consult the system manual for supported capacities, approved population order and installation steps before purchase to avoid detection failures.
Points forts
- 192 GB capacity from two 96 GB modules
- DDR5 6400 speed with CL52 latency
- 1 V registered ECC for server stability
- 288-pin RDIMM fits Supermicro H14DST-F
- Lifetime replacement warranty with US support
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Will the 1.10V DDR5 6400 RDIMMs run hot or draw more power when the Supermicro H14DST-F is fully loaded all day?
Each module operates at 1.10V and has no heat spreader, so sustained load relies on the server's own airflow and DIMM-slot cooling design.
What must my Supermicro H14DST-F already have to accept this 2Rx4 Registered ECC kit?
The board needs free 288-pin DDR5 RDIMM slots and a BIOS that supports 96GB 2Rx4 Registered ECC modules at PC5-51200 speed.
Can I add this 2Rx4 DDR5 kit alongside smaller-capacity Registered ECC DDR5 modules already installed in the same H14DST-F?
Mixing ranks is possible if the motherboard manual approves the population order, but every slot must use DDR5 Registered ECC at 1.10V.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



