NEMIX RAM
NEMIX RAM 192GB (4 x 48GB) DDR5 6400 CL52 2Rx8 ECC Registered RDIMM memory upgrade for Supermicro H14DST-FL
192 GB DDR5-6400 ECC registered RDIMM kit built for the Supermicro H14DST-FL motherboard
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency keeps data moving at rated throughput
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the Supermicro H14DST-FL memory controller specification
- 288-pin RDIMM form factor fits the board's required DIMM slots exactly
Exact-match DDR5-6400 RDIMM kit
This 192GB kit delivers four 48GB DDR5-6400 registered ECC modules built to the Supermicro H14DST-FL memory controller's exact rank, voltage and timing requirements. Each 288-pin RDIMM runs at 1.10V with CL52 latency and a 2Rx8 organisation so the board recognises the full capacity at rated speed without manual tuning.
Replaces partial or mixed-capacity populations
The kit upgrades systems currently running fewer modules, lower-density DIMMs or mismatched ranks that force the controller to down-clock or limit usable slots. Populating all four channels with identical registered ECC modules removes those compromises and restores the bandwidth the platform was designed to deliver.
192GB registered ECC headroom
Four 48GB ranks provide the dense capacity needed for virtualisation hosts, in-memory databases and large-scale compute jobs while ECC corrects single-bit errors on the fly. Workloads that exceed 192GB or require unbuffered UDIMM form factors fall outside this kit's supported configuration.
Points forts
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency keeps data moving at rated throughput
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the Supermicro H14DST-FL memory controller specification
- 288-pin RDIMM form factor fits the board's required DIMM slots exactly
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Will the 288-pin RDIMM modules fit the Supermicro H14DST-FL memory slots?
Yes, the kit uses the 288-pin Registered RDIMM form factor that the H14DST-FL requires; it is not a UDIMM or SODIMM.
What is the correct installation sequence for the four 48 GB modules on this board?
Consult the Supermicro H14DST-FL manual for the approved DIMM population order; the board's memory-controller rules dictate which slots must be filled first for full 192 GB operation.
Do these Samsung, Micron or Hynix chips need any firmware updates or thermal-pad replacement over time?
No firmware updates or thermal-pad changes are required; the modules run at 1.1 V with no heat spreader and rely on the server's standard airflow for cooling.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



