Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR4 2933 CL21 1.2V 288-Pin UDIMM memory upgrade

SKU CH-RZDX-KCP6Y

Four unbuffered DDR4 UDIMMs add 32 GB at 2933 MHz CL21 for compatible Supermicro workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands system memory for demanding workloads
  • DDR4 2933 MT/s transfers data quickly across the bus
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • 4 × 8 GB unbuffered UDIMMs install in standard 288-pin slots

32 GB DDR4 kit for Supermicro workstations

This 32 GB kit contains four 8 GB DDR4 2933 UDIMM modules built for Supermicro desktop and SuperWorkstation systems. It targets administrators and builders who need a matched set for multi-channel operation on supported platforms.

Unbuffered non-ECC modules without heat spreaders

Each 288-pin DIMM uses major-brand Samsung, Micron or Hynix chips in a 1Rx8 layout and runs at 1.20 V. The absence of a spreader keeps the profile low for dense chassis, while the unbuffered non-ECC design suits standard workstation boards.

DDR4 2933 CL21 limits bandwidth to PC4-23400

The JEDEC-standard 2933 MT/s rate and CL21 latency cap peak throughput at PC4-23400, so workloads that scale with higher memory clocks will not reach their full potential on this kit. Builders needing faster DDR4 speeds or ECC protection must select a different specification.

Points forts

  • 32 GB kit expands system memory for demanding workloads
  • DDR4 2933 MT/s transfers data quickly across the bus
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • 4 × 8 GB unbuffered UDIMMs install in standard 288-pin slots

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions sur cet article

Does the DDR4 2933 interface cap real-world throughput at PC4-23400?

Yes, the kit is rated DDR4 2933 (PC4-23400), so peak bandwidth is limited to that transfer rate.

Will the 288-pin UDIMM modules fit a standard desktop DIMM slot?

They are 288-pin DDR4 UDIMMs, which match the physical keying and length of ordinary desktop memory slots.

How do I install the 1Rx8 sticks, and which step do people miss?

Power down, open the case, align the notch on each 1Rx8 module with the slot key, press firmly until both retention clips click, then verify all four modules are recognised in BIOS.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.