SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $US
0.00502487BTC
En stock
NEMIX RAM
NEMIX RAM 384GB 12x32GB DDR5 6400 CL52 1.1V 2Rx8 ECC Registered RDIMM memory upgrade for Supermicro H14SHM
A 384 GB DDR5 registered ECC kit with twelve 32 GB modules at 6400 MT/s, CL52, 1.1 V, validated for the Supermicro H14SHM motherboard
- Capacity384GB (12 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity across twelve 32 GB modules for maximum server density
- DDR5-6400 (PC5-51200) speed with CL52 latency runs at rated performance
- Registered ECC architecture with 2Rx8 rank corrects single-bit errors and stabilises full population
- 1 V operating voltage matches the motherboard's memory controller specification exactly
- Validated for Supermicro H14SHM motherboard using 288-pin RDIMM form factor
Capacity and form factor
This 384GB kit contains twelve 32GB DDR5 RDIMMs built to the 288-pin registered ECC standard. It targets administrators expanding a Supermicro H14SHM server to its maximum supported memory capacity.
Upgrade path and timing
The kit replaces any smaller DDR5 RDIMM population or a mixed-rank configuration that forces the controller to down-clock. The jump is worth it when the workload demands full 384GB capacity at the rated 6400 MT/s speed with CL52 latency and 1.1V operation.
Build integration
Each module is a 2Rx8 registered DIMM without a heat spreader, so the memory controller sees the expected electrical load across all populated slots. ECC and registered buffering maintain signal integrity when every slot is filled, freeing the CPU from single-bit error handling and preventing silent data corruption.
Points forts
- 384 GB total capacity across twelve 32 GB modules for maximum server density
- DDR5-6400 (PC5-51200) speed with CL52 latency runs at rated performance
- Registered ECC architecture with 2Rx8 rank corrects single-bit errors and stabilises full population
- 1 V operating voltage matches the motherboard's memory controller specification exactly
- Validated for Supermicro H14SHM motherboard using 288-pin RDIMM form factor
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K12 |
| Capacity | 384GB (12 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 12X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Does this kit use the 288-pin DDR5 RDIMM form factor required by the Supermicro H14SHM?
Yes, every module is a 288-pin DDR5 RDIMM, the exact registered form factor the H14SHM motherboard expects.
What is the correct population order for all twelve 32 GB modules on the H14SHM?
Follow the motherboard manual's DIMM population sequence for a full 12-DIMM install; the kit matches the board's 2Rx8 rank and 1.1 V spec so each slot runs at DDR5-6400 CL52.
Will the registered ECC design of these modules require any firmware updates or ongoing maintenance?
No firmware updates are needed for the memory itself; ECC error correction and registered buffering operate automatically once the modules are seated and the system posts.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $US
0.00096129BTC
En stock