SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $US
0.00501792BTC
En stock
NEMIX RAM
NEMIX RAM 384GB 4x96GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14SHM memory upgrade
384 GB registered ECC DDR5 kit with four 96 GB modules at 6400 MT/s CL52 1.1 V for Supermicro H14SHM
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384GB total capacity with four 96GB modules for maximum server density
- DDR5 6400 speed and CL52 latency deliver rated throughput at 1.1V
- Registered ECC architecture corrects single-bit errors and supports full population
- 288-pin RDIMM form factor matches Supermicro H14SHM slot requirements exactly
- Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability
Exact-match server upgrade
This 384GB kit contains four 96GB DDR5 registered ECC RDIMMs built for the Supermicro H14SHM motherboard. The modules run at DDR5-6400 with CL52 timing at 1.1V, matching the board's required rank, voltage and timing so the controller recognises full capacity at rated speed.
Capacity and headroom
Four dual-rank 2Rx4 modules fill the supported slots and deliver 384GB of registered memory with on-the-fly single-bit error correction. The registered architecture keeps the memory controller stable when every slot is populated, but the kit cannot exceed the motherboard's maximum supported capacity or population rules.
DDR5 288-pin RDIMM form factor
These modules use the 288-pin DDR5 RDIMM interface this board requires; they are not compatible with UDIMM or SODIMM slots. Verify your system manual for approved DIMM population order and maximum capacity before installation.
Points forts
- 384GB total capacity with four 96GB modules for maximum server density
- DDR5 6400 speed and CL52 latency deliver rated throughput at 1.1V
- Registered ECC architecture corrects single-bit errors and supports full population
- 288-pin RDIMM form factor matches Supermicro H14SHM slot requirements exactly
- Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Will this 384GB DDR5 6400 kit work in a Supermicro H14SHM that already has older DDR5 RDIMMs installed?
The kit is validated for the H14SHM motherboard. Mixing it with existing DDR5 RDIMMs requires matching speed, voltage, rank, and ECC type; consult the board manual for approved population rules before combining modules.
How can I verify the 4x96GB modules are running at DDR5 6400 CL52 after installation?
Enter the BIOS or use a hardware-info tool to confirm each slot shows 6400 MT/s, CL52 timings, 1.10 V, and registered ECC status for all four 96 GB DIMMs.
What comes in the box and do I need extra parts to install the 288-pin RDIMMs?
The box contains the four 96 GB DDR5 6400 CL52 1.10 V ECC registered RDIMMs. No additional components are required; the modules plug directly into the H14SHM's 288-pin DIMM slots.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $US
0.00095996BTC
En stock