Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board SODIMM with black memory chips, 204 pins, low profile form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX XT-3817 JIVA 17 memory upgrade

SKU CH-RA78-KVDQB

A 4 GB DDR3 1333 SODIMM module built for the POSIFLEX XT-3817 JIVA 17 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
  • 35V low-voltage operation reduces power draw in always-on point-of-sale environments
  • 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
  • CL9 CAS latency keeps transaction processing snappy during peak hours
  • 204-pin DDR3 form factor drops straight into the terminal without adapters

POS Terminal Memory Upgrade

This 4GB DDR3 SODIMM is built for the POSIFLEX XT-3817 JIVA 17 terminal. It uses a 204-pin unbuffered non-ECC design at PC3-10600 speed. The module targets repair technicians and IT staff maintaining point-of-sale fleets.

Sustained Load Behaviour

Rated at 1333MHz with CL9 latency, the stick runs at 1.35V nominal and 1.50V maximum. Major-brand Samsung, Micron or Hynix chips are stress-tested under load to verify stability during continuous transaction processing.

Thermals Noise and Power

No heat spreader is fitted, relying on the terminal's internal airflow. Low-voltage DDR3 operation keeps power draw modest and silent, matching the fanless or quiet-cooling design of the POS chassis.

Points forts

  • 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
  • 35V low-voltage operation reduces power draw in always-on point-of-sale environments
  • 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
  • CL9 CAS latency keeps transaction processing snappy during peak hours
  • 204-pin DDR3 form factor drops straight into the terminal without adapters

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How much power does the 1.35V DDR3 SODIMM draw when the POS terminal runs all day?

The module is rated at 1.35V, which is lower than the standard 1.50V DDR3 voltage, reducing power draw and heat during continuous operation in the POSIFLEX terminal.

What must the POSIFLEX XT-3817 JIVA 17 already have for this 204-pin SODIMM to work?

The system needs an available 204-pin DDR3 SODIMM slot that supports 1333MHz PC3-10600 unbuffered non-ECC memory with CL9 timing and 2Rx8 organisation.

Will this DDR3 1333 module run correctly alongside the original memory in the JIVA 17?

Yes, it matches the PC3-10600 speed, CL9 latency, 1.35V voltage and 2Rx8 rank of the factory memory, so the terminal will operate in dual-channel mode without timing conflicts.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.