NEMIX RAM
NEMIX RAM 4GB DDR4 2400 CL17 1.2V 288-Pin UDIMM desktop RAM
A 4 GB DDR4 desktop UDIMM running at 2400 MT/s with CL17 latency and 1.2 V operation
- Capacity4GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 4 GB capacity adds responsive multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s peak bandwidth
- CL17 latency keeps data access snappy
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
Capacity & fit
This module provides 4 GB of DDR4 memory in a single 288-pin UDIMM. It is intended for desktop PCs and compatible NAS units that accept standard unbuffered non-ECC DIMMs.
Build & connectors
The stick uses major OEM chips from Samsung, Micron or Hynix and runs at 1.20 V with a CL17 latency. No heat spreader is fitted, so it sits low in tight motherboard layouts and requires no extra clearance.
Upgrade path
It replaces slower or lower-capacity DDR4 modules in systems that support PC4-19200 speeds. The jump is worthwhile when a board has free slots and the workload benefits from additional standard-voltage memory.
Points forts
- 4 GB capacity adds responsive multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s peak bandwidth
- CL17 latency keeps data access snappy
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD19200-418K1 |
| Capacity | 4GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Questions sur cet article
What speed does the DDR4 2400 interface actually run at in a typical desktop?
The module is rated for DDR4 2400 (PC4-19200) and will operate at that data rate when the motherboard supports it; otherwise it downclocks to the highest speed the platform allows.
Does the 288-pin UDIMM fit a standard desktop DIMM slot without a heat spreader?
Yes, the 288-pin unbuffered DIMM uses the standard desktop form factor and has no heat spreader, so it fits any DDR4 UDIMM slot with normal clearance.
How is the module installed and what step do people often miss?
Align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that the memory is recognised at the correct speed and capacity.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



