Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 512GB (16x32GB) DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM server RAM

SKU CH-R5AX-86G88

A 512 GB DDR5 registered ECC kit of sixteen 32 GB modules running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from 16 x 32 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • CL40 CAS latency at 1.10 V operating voltage
  • ECC registered 2Rx4 architecture for server data integrity
  • 288-pin RDIMM form factor compatible with Dell PowerEdge R860

Server Memory Kit

This NEMIX RAM kit provides 512GB of DDR5 server memory across sixteen 32GB registered DIMMs. It is built for IT professionals managing mission-critical workloads on compatible Dell PowerEdge platforms. The modules deliver ECC error correction and registered buffering for data integrity in enterprise environments.

DDR5 4800 Interface Limits

The DDR5 4800 standard (PC5-38400) sets the maximum transfer rate and timing envelope these modules operate within. CAS latency is fixed at CL40 and voltage at 1.10V, so performance cannot exceed the JEDEC baseline for this speed grade. Registered signalling adds a cycle of command delay compared to unbuffered designs.

Pre-Installation Checks

Verify that your motherboard supports 288-pin DDR5 RDIMMs with 2Rx4 organisation and can address the full 512GB capacity across all populated slots. Confirm the system BIOS is current enough to initialise sixteen registered modules at the rated speed. Buyers needing unbuffered UDIMMs or a lower total capacity should select a different kit.

Points forts

  • 512 GB total capacity from 16 x 32 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • CL40 CAS latency at 1.10 V operating voltage
  • ECC registered 2Rx4 architecture for server data integrity
  • 288-pin RDIMM form factor compatible with Dell PowerEdge R860

Caractéristiques

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-324K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Questions sur cet article

Should I choose the 512GB kit with 16 modules of 32GB or a smaller capacity for my Dell PowerEdge R860?

The kit provides 512GB total using 16 modules of 32GB each; select it when your workload needs that full capacity and your server has enough DIMM slots to populate all 16 positions.

What does the DDR5 4800 CL40 rating deliver once the modules are installed in the server?

The modules run at 4800 MT/s with a CAS latency of 40 cycles, giving a PC5-38400 peak bandwidth that the memory controller will use for registered ECC workloads.

How does the 288-pin DDR5 RDIMM interface limit performance in practice?

The 288-pin registered DDR5 form factor caps the kit at the JEDEC 4800 MT/s standard speed and 1.10V operation, so the server cannot exceed that data rate without overclocking support.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.