Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-P58K-SGRK6

Eight 64 GB DDR5 registered ECC RDIMMs totalling 512 GB at 4800 MT/s CL40 1.10 V for the Supermicro H14DSG-OM motherboard

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Voir les 30 autres configurations
  • 512 GB total capacity from eight matched 64 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM board

Exact-match DDR5-4800 ECC RDIMM kit

This 512GB kit contains eight 64GB DDR5 4800 modules rated CL40 at 1.10V. Each stick is a 288-pin 2Rx4 Registered ECC RDIMM built with major OEM chips. The Registered architecture lets the Supermicro H14DSG-OM motherboard run all slots fully populated at rated speed while ECC corrects single-bit errors on the fly.

Verify board population rules first

Check the Supermicro H14DSG-OM manual for supported capacities per slot, approved DIMM population order, and any BIOS version requirements before ordering. The board requires 288-pin RDIMM modules — not UDIMM or SODIMM — and population rules change with CPU count and memory-channel layout. Confirm the eight-module configuration matches your processor installation and channel-filling sequence.

Replaces partial or mixed-capacity sets

The kit upgrades from smaller Registered ECC kits or mismatched modules that force the controller to downclock or limit capacity. Moving to a validated eight-module 512GB set restores full-channel bandwidth and eliminates rank-mismatch errors. The jump is worth it when your workload needs maximum registered capacity and you want a single part number qualified for this exact motherboard.

Points forts

  • 512 GB total capacity from eight matched 64 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM board

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What does the 512GB 8x64GB kit include and is anything else needed to install it in a Supermicro H14DSG-OM?

The kit contains eight 64GB DDR5 4800 CL40 2Rx4 1.1V 288-pin ECC Registered RDIMM modules. No extra parts are required; the modules plug directly into the motherboard's DDR5 RDIMM slots.

Why choose the 512GB 8x64GB DDR5 4800 CL40 2Rx4 ECC RDIMM kit over other capacities for the Supermicro H14DSG-OM?

This kit matches the board's DDR5 RDIMM requirement, registered architecture, 2Rx4 rank, 1.1V voltage and CL40 timing so all eight slots can be populated at the rated 4800 MT/s speed.

What does the DDR5 4800 (PC5-38400) rating mean once the modules are running in the server?

The modules operate at 4800 MT/s with CL40 latency at 1.1V, delivering the bandwidth and error-correcting stability the Supermicro H14DSG-OM memory controller expects when fully populated.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.