Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933 CL21 2Rx8 UDIMM memory upgrade

SKU CH-MWCM-YA128

A 64 GB DDR4 2933 kit (2 × 32 GB, CL21, 1.20 V, 288-pin UDIMM) validated for Supermicro workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit expands workstation memory capacity for heavy workloads
  • Dual 32 GB modules populate two slots for balanced channel performance
  • DDR4 2933 speed matches Supermicro platform specifications
  • CL21 latency at 1.2 V delivers stable operation under load
  • 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility

System-specific DDR4 kit

This 64 GB kit contains two 32 GB DDR4 UDIMMs rated at 2933 MT/s with CL21 latency. It is built for Supermicro workstations such as the SuperWorkstation 5039AD-I and the C9X299-PGF motherboard, delivering a straightforward capacity upgrade for supported platforms.

DDR4 2933 interface limits

The modules run at the standard 1.20 V and use the 288-pin DDR4 UDIMM form factor, so they only fit boards wired for DDR4. Speed is fixed at PC4-23400 with 2Rx8 organisation, and the lack of ECC or registered buffers means they cannot be used in systems that require error-correcting or registered memory.

Unbuffered modules without spreaders

Each stick is an unbuffered UDIMM without a heat spreader, keeping the profile low for tight server or workstation chassis. The 288-pin edge connector aligns with standard DDR4 slots, and the kit is validated for the listed Supermicro models to ensure stable operation in those configurations.

Points forts

  • 64 GB kit expands workstation memory capacity for heavy workloads
  • Dual 32 GB modules populate two slots for balanced channel performance
  • DDR4 2933 speed matches Supermicro platform specifications
  • CL21 latency at 1.2 V delivers stable operation under load
  • 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN NON-ECC Unbuffered UDIMM KIT

Questions sur cet article

Should I choose the 64GB kit or look for a single 32GB module for my SuperMicro system?

The kit provides two matched 32GB modules for dual-channel operation; a single module would run in single-channel mode and reduce memory bandwidth.

What does the 2933 MT/s rating mean once the modules are installed in my SuperMicro workstation?

The memory will run at up to 2933 MT/s if the CPU and motherboard support that speed; otherwise it will downclock to the highest speed the platform allows.

Is the 288-pin DDR4 UDIMM interface compatible with standard desktop motherboards or only SuperMicro server boards?

The 288-pin DDR4 UDIMM form factor fits any desktop or workstation board with DDR4 UDIMM slots, but this kit is validated for the listed SuperMicro systems.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.