Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green SODIMM modules, black chips, gold contacts

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM Kit POSIFLEX ZT-3716E

SKU CH-EFFR-9SANK

Dual 32 GB DDR4 3200 SODIMM kit, CL22 1.20 V, for POSIFLEX ZT-3716E terminals

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB dual-channel kit boosts POS terminal responsiveness
  • 3200 MHz DDR4 speed matches POSIFLEX ZT-3716E requirements
  • CL22 latency ensures stable operation under continuous load
  • 2 V low voltage reduces heat in compact kiosk enclosures
  • 260-pin SODIMM form factor fits directly into Haydn ZT series slots

POSIFLEX ZT-3716E memory upgrade

This kit supplies 64 GB of DDR4 3200 SODIMM memory in two 32 GB modules built for the POSIFLEX ZT-3716E terminal. It targets IT teams that need reliable capacity increases for point-of-sale or kiosk workloads. The modules are unbuffered, non-ECC and validated for the specified platform. Installation follows the standard SODIMM procedure for the device.

Thermals noise and power draw

Each module runs at 1.20 V without a heat spreader, keeping power draw low inside the compact terminal chassis. Passive cooling from the system airflow is sufficient for typical POS transaction workloads. The low-voltage DDR4 design produces minimal acoustic contribution in fanless or quiet environments. CL22 latency at 3200 MT/s delivers steady throughput for database and UI tasks.

Sustained load behaviour

Major OEM chips from Samsung Micron or Hynix are stress-tested under load to maintain stability during extended operating hours. The 2Rx8 organisation supports consistent bandwidth for multi-threaded retail applications. Unbuffered operation avoids registered latency penalties in this platform. The kit delivers dependable performance for continuous shift use without throttling.

Points forts

  • 64 GB dual-channel kit boosts POS terminal responsiveness
  • 3200 MHz DDR4 speed matches POSIFLEX ZT-3716E requirements
  • CL22 latency ensures stable operation under continuous load
  • 2 V low voltage reduces heat in compact kiosk enclosures
  • 260-pin SODIMM form factor fits directly into Haydn ZT series slots

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

How do I install the 260-Pin DDR4 SODIMM modules into the POSIFLEX ZT-3716E, and what step is often missed?

Power off the terminal, unplug it, open the memory compartment, align the notch on each 260-Pin DDR4 SODIMM with the slot key, press firmly until the side clips click, then replace the cover and power on. The step often missed is fully seating both modules so the clips engage on both sides.

What maintenance or replacement will this 64GB DDR4 3200 CL22 kit need over time?

No routine maintenance is required for the DDR4 SODIMM modules. If a module fails, the kit is covered by a lifetime replacement warranty; otherwise, replacement is only needed if you later require more capacity or a different speed.

What limit appears first when the POS terminal runs sustained workloads with this 1.2V 2Rx8 memory?

The CAS latency of CL22 at 3200 MT/s sets the primary timing ceiling; under continuous load the memory controller will hit that latency bound before voltage or thermal limits become a factor.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.