Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green SODIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 2Rx8 SODIMM memory upgrade

SKU CH-DGAH-4A1FS

A 64 GB dual-channel DDR5 SODIMM kit rated at 4800 MT/s with CL40 latency and 1.1 V operation for Supermicro systems

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • Low 1.10 V operation reduces power draw
  • CL40 CAS latency for responsive data access
  • Validated for SuperMicro X13SRN-H motherboard compatibility

Targeted DDR5 SODIMM Kit

This 64GB kit delivers two 32GB DDR5 4800 modules built for the SuperMicro X13SRN-H motherboard. It suits administrators expanding memory in compatible Supermicro servers or workstations. The non-ECC unbuffered design matches the platform's supported configuration. Installation follows standard SODIMM procedures.

262-Pin Unbuffered Layout

Each module uses a 262-pin DDR5 SODIMM edge connector without a heat spreader. The 2Rx8 organisation and 1.10V operating voltage align with the board's electrical requirements. Major OEM chips from Samsung Micron or Hynix populate the PCB. The low-profile form factor fits dense chassis without clearance concerns.

CL40 DDR5 4800 Upgrade

Moving from lower-capacity or slower DDR5 SODIMMs to this 64GB CL40 kit increases bandwidth to PC5-38400 and doubles rank density per slot. The jump is worthwhile when virtualization hosts or database workloads exhaust existing memory. Systems already running DDR5 4800 at full capacity will not gain speed from this change.

Points forts

  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • Low 1.10 V operation reduces power draw
  • CL40 CAS latency for responsive data access
  • Validated for SuperMicro X13SRN-H motherboard compatibility

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

What speed does the DDR5 4800 PC5-38400 interface actually run at in this SuperMicro kit?

The modules are rated for DDR5 4800 MT/s (PC5-38400) and will operate at that speed when the platform memory controller supports it; the JEDEC standard voltage is 1.1 V.

Will these 262-pin SODIMMs fit the SuperMicro X13SRN-H motherboard slots?

Yes, the kit uses 262-pin DDR5 SODIMM form factor, which matches the memory slots on the SuperMicro X13SRN-H motherboard.

How do I install the 2Rx8 modules and what step is often missed?

Power off, open the chassis, align the notch on each 262-pin SODIMM with the slot key, press firmly until the side latches click; the step often missed is seating both modules fully so both latches engage.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.