Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 ECC RDIMM THINKMATE

SKU CH-WS7H-9Z52E

Four 16 GB DDR5 modules deliver 64 GB of ECC registered server memory at 4800 MT/s with CL40 latency

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity for heavy server loads
  • 4800 MT/s DDR5 bandwidth feeds multi-core processors efficiently
  • 1 V operation reduces power draw across 64 GB kit
  • Validated for Thinkmate RAX, QS, QH, QT and QN platforms

ThinkMate DDR5 4800 ECC RDIMM kit

This 64 GB kit contains four 16 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency. It is built for ThinkMate servers and workstations that require ECC protection and registered signalling. The 1.1 V operating voltage matches the DDR5 baseline for enterprise platforms.

Upgrade from non-ECC or slower DDR5

Replaces unbuffered or lower-speed DDR5 memory when data integrity and full motherboard capacity are required. The jump is worth it for workloads that cannot tolerate silent corruption or that need the full 64 GB quad-channel population supported by the qualified ThinkMate models.

Tool-free DIMM installation

Modules seat in standard 288-pin DDR5 RDIMM slots without additional hardware. Common issues include mixing registered and unbuffered DIMMs, populating slots in the wrong order for the specific ThinkMate chassis, and forgetting to enable ECC in the system BIOS after installation.

Points forts

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity for heavy server loads
  • 4800 MT/s DDR5 bandwidth feeds multi-core processors efficiently
  • 1 V operation reduces power draw across 64 GB kit
  • Validated for Thinkmate RAX, QS, QH, QT and QN platforms

Caractéristiques

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions sur cet article

Will these 288-pin DDR5 RDIMMs fit the memory slots on a ThinkMate RAX-QE12 server?

Yes, the kit is built for ThinkMate RAX-QE12, QS12, QH12, QT12, QT16, QH24, QH4, QN12 and QH8 servers, so the 288-pin DDR5 RDIMM form factor matches those boards.

What is the correct order for populating the four 1Rx8 modules during installation?

Install all four 16 GB modules in the slots specified by the server manual, usually starting with the first channel of each CPU socket; the common mistake is leaving a required slot empty or mixing ranks.

When should the ECC registered modules be replaced if correctable errors start appearing in the system logs?

Replace the kit when the platform firmware reports uncorrectable ECC events or when correctable error counts exceed the threshold set in the server management console.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.