Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 PC5-38400 CL40 2Rx4 1.1V 288-Pin ECC RDIMM Hynix HMCA8GR8MJR4C-EB memory upgrade

SKU CH-C50Y-V07XM

A 64 GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity doubles server memory headroom
  • DDR5 4800 speed delivers 38400 MT/s bandwidth
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server boards

64 GB DDR5 ECC RDIMM for server builds

This 64 GB DDR5 4800 module delivers registered ECC memory for compatible server and workstation platforms. The 2Rx4 organisation and CL40 timing support data integrity under sustained workloads. It targets administrators upgrading Hynix-qualified systems with a single high-density stick.

Fits 288-pin DDR5 RDIMM slots at 1.1 V

The module requires a motherboard wired for DDR5 registered DIMMs and a memory controller that accepts ECC RDIMMs. No heat spreader is fitted, so airflow across the PCB must be provided by the chassis. It frees a second slot when maximum capacity per channel is needed.

Ships as a single 64 GB stick in static-safe

The pack contains only the memory module; no cables, software or additional hardware are included. Installation follows the system manual for registered DDR5 memory. The bare board design keeps weight low for dense configurations.

Points forts

  • 64 GB capacity doubles server memory headroom
  • DDR5 4800 speed delivers 38400 MT/s bandwidth
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server boards

Caractéristiques

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions sur cet article

Will the CL40 latency at 4800 MT/s become the bottleneck before bandwidth fills up?

At 4800 MT/s with CL40 timing, each access cycle takes the rated latency, so sustained workloads hit this timing ceiling before the PC5-38400 bandwidth limit is reached.

How much heat and power does a single 64 GB module draw during continuous operation?

The module runs at 1.10 V without a heat spreader, so power draw stays low and thermals depend on chassis airflow rather than active cooling.

What motherboard slot and firmware support are required to use this 288-pin ECC RDIMM?

You need a server or workstation board with DDR5 RDIMM slots that accept 2Rx4 registered modules and have BIOS support for ECC memory.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.