Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green bare circuit board DDR5 memory module with gold edge connector and black chips

NEMIX RAM

NEMIX RAM 64GB DDR5 6400MHz CL52 4Rx4 1.1V 288-PIN ECC RDIMM Supermicro memory upgrade

SKU CH-REFD-MY9P7

A 64 GB DDR5 ECC RDIMM running at 6400 MHz with CL52 latency, 1.1 V operation and quad-rank 4Rx4 architecture for Supermicro servers

  • Capacity64GB
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 64 GB capacity supports memory-intensive server workloads
  • DDR5 6400 MHz speed delivers high data throughput
  • CL52 latency provides responsive registered memory access
  • 1 V operation reduces power draw in dense configurations
  • ECC RDIMM 4Rx4 design ensures data integrity for Supermicro X14SBW-F

64GB DDR5 ECC RDIMM for Supermicro Servers

This single 64GB registered DDR5 module operates at 6400MHz with CL52 latency and 1.1V power draw. It targets IT teams upgrading Supermicro X14SBW-F platforms that require ECC error correction and registered signal buffering for stability.

4Rx4 organisation and major OEM chips

The 4Rx4 rank layout uses Samsung, Micron or Hynix components to meet dense server workloads. ECC and registered operation together protect data integrity and reduce electrical load on the memory controller in multi-DIMM configurations.

Tool-free DIMM slot insertion

Alignment notches on the 288-pin edge connector prevent backwards insertion. Installers must verify the motherboard Qualified Vendor List and populate slots in the order the manual specifies; mismatched ranks or missing BIOS updates are the usual causes of POST failures.

Points forts

  • 64 GB capacity supports memory-intensive server workloads
  • DDR5 6400 MHz speed delivers high data throughput
  • CL52 latency provides responsive registered memory access
  • 1 V operation reduces power draw in dense configurations
  • ECC RDIMM 4Rx4 design ensures data integrity for Supermicro X14SBW-F

Caractéristiques

BrandNEMIX RAM
SeriesSupermicro Compatible Series Server Memory
ModelDDR5 ECC RDIMM Registered Server RAM
Part NumberMR51200-944K1
Capacity64GB
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB (1 x 64GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM

Questions sur cet article

Will the registered 4Rx4 DDR5 module require any firmware updates or component swaps during its service life?

The module is a standard 288-pin DDR5 RDIMM with on-die ECC; no user-serviceable parts or firmware updates are needed after installation.

What electrical or thermal limit appears first when the 64 GB stick runs at 6400 MT/s continuously?

The JEDEC 1.10 V operating voltage and CL52 latency define the power envelope; sustained loads stay within the rated DDR5 specification.

How much additional heat does the bare 288-pin module contribute when the server runs around the clock?

Without a heat spreader the module relies on chassis airflow; at 1.1 V typical power draw is low enough for standard server cooling.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.