NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 1.2V 288-pin UDIMM desktop RAM
An 8 GB DDR4 desktop module running at 2400 MT/s with CL17 latency and 1.2 V operation
- Capacity8GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 8GB capacity boosts multitasking headroom for everyday workloads
- DDR4 2400 speed moves data at PC4-19200 bandwidth
- CL17 latency keeps response tight under load
- 20V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
8 GB DDR4 2400 UDIMM for desktop upgrades
This module adds 8 GB of DDR4 memory running at 2400 MT/s with CL17 timing. It targets users who need a straightforward capacity increase for everyday workloads on compatible desktop motherboards.
Unbuffered non-ECC design
The stick uses a plain green PCB without a heat spreader, keeping the profile low for tight slots. Its 1.20 V operating voltage matches the DDR4 baseline, so it draws standard power and fits any board that accepts unbuffered non-ECC UDIMMs.
CL17 latency at 2400 MT/s determines responsiveness
The CAS latency of 17 cycles at the rated speed sets the access delay for this kit. Matching this timing with existing modules avoids downclocking and keeps the memory subsystem running at its specified rate.
Points forts
- 8GB capacity boosts multitasking headroom for everyday workloads
- DDR4 2400 speed moves data at PC4-19200 bandwidth
- CL17 latency keeps response tight under load
- 20V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD19200-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Questions sur cet article
Does the DDR4 2400 PC4-19200 module run at the rated 2400 MT/s or drop to a lower JEDEC speed?
It operates at DDR4 2400 (PC4-19200) with CL17 timing at 1.2 V, matching the rated specification.
Will this single 288-pin UDIMM fit a standard desktop DIMM slot?
Yes, the 288-pin UDIMM form factor matches standard desktop DDR4 slots and requires no heat spreader clearance.
How is the module installed and what step is often missed?
Align the notch with the slot key, press firmly until both retention clips click, then verify the speed in BIOS.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock