Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board SODIMM with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 CL19 SODIMM POSIFLEX XT-4015-G2 memory upgrade

SKU CH-C7N7-9G6NH

8GB DDR4 2666 SODIMM for POSIFLEX XT-4015-G2, CL19 1.2V non-ECC upgrade

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2666 speed matches POSIFLEX XT-4015-G2 memory bus
  • CL19 latency keeps transaction processing responsive
  • 20 V low voltage reduces terminal power draw
  • 260-pin SODIMM form factor fits the kiosk motherboard slot

POSIFLEX XT-4015-G2 memory upgrade

This 8GB DDR4 SODIMM is built specifically for the POSIFLEX XT-4015-G2 JIVA foldable 15-inch terminal. It targets IT teams maintaining point-of-sale kiosks that need a reliable, system-matched module. The single 8GB stick fits the platform's memory slot without configuration guesswork.

260-pin unbuffered non-ECC build

The module uses major OEM chips from Samsung, Micron or Hynix on a standard 260-pin SODIMM PCB with no heat spreader. It runs at 1.2V and carries a CL19 latency at 2666 MT/s. The unbuffered, non-ECC design matches the terminal's motherboard requirements for direct, low-latency operation.

Replaces slower or smaller DDR4 SODIMMs

Upgrading from a 4GB stick or a lower-speed DDR4 module adds capacity and bandwidth for multi-tasking POS workloads. The jump is worth it when the terminal shows memory pressure during peak transaction periods or when the original module has reached end of life.

Points forts

  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2666 speed matches POSIFLEX XT-4015-G2 memory bus
  • CL19 latency keeps transaction processing responsive
  • 20 V low voltage reduces terminal power draw
  • 260-pin SODIMM form factor fits the kiosk motherboard slot

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

Does the DDR4 2666 interface cap at PC4-21300 bandwidth in the POSIFLEX XT-4015-G2?

Yes, the module runs at DDR4 2666 and is rated PC4-21300, so the interface tops out at that transfer rate in the terminal.

Will the 260-pin SODIMM fit the JIVA Foldable 15 Terminal memory slot?

The stick is a standard 260-pin DDR4 SODIMM, which matches the slot used in the POSIFLEX XT-4015-G2 and JIVA Foldable 15 Terminal.

How do I install the module, and what step is often missed?

Power off the terminal, open the memory cover, insert the SODIMM at an angle until the gold contacts disappear, then press down until the side clips click — many forget to seat it fully before locking.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.