NEMIX RAM 8GB DDR4 2933MHz CL21 1Rx8 UDIMM memory upgrade

Samsung DDR4 2933 UDIMM for desktop upgrades

This 8 GB DDR4 module runs at 2933 MHz with CL21 latency and 1.2 V operation. It uses a 1Rx8 unbuffered non-ECC layout on a 288-pin UDIMM form factor. The stick is built with Samsung chips and targets Samsung desktop systems that accept PC4-23400 memory.

Tool-free slot insertion takes minutes

Align the notch with the motherboard key and press until the retention clips click. No heat spreader means low clearance but also no thermal headroom for sustained heavy loads. The most common issue is mixing ranks or speeds across channels which can force the system to downclock.

DDR4 platform ceiling limits further scaling

The DDR4 interface tops out at the rated 2933 MT/s on this module so faster kits will not run at their advertised speed without motherboard and CPU support. Capacity is fixed at 8 GB per stick and the single-rank design cannot be expanded on the same DIMM. Non-ECC operation rules out error correction for critical workloads.