Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 SODIMM POSIFLEX TK-2132 memory upgrade

SKU CH-9QXM-BEJ8A

8 GB DDR4 3200 SODIMM module for POSIFLEX TK-2132 kiosk, CL22 1.2 V 260-pin unbuffered

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB DDR4 3200 MHz boosts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX TK-2132 Stellar Series directly
  • 2Rx8 dual-rank design maximises memory bandwidth
  • Major OEM Samsung, Micron or Hynix chips ensure stability

System-Specific DDR4 SODIMM

This 8 GB DDR4 3200 module is built for the POSIFLEX TK-2132 Stellar Series kiosk. It arrives as a single 260-pin SODIMM rated at PC4-25600 with CL22 latency and 1.20 V operation. The 2Rx8 unbuffered design targets point-of-sale and kiosk workloads that demand verified compatibility.

Thermals and power in daily use

Running at the standard 1.20 V keeps power draw low inside the compact kiosk chassis. Without a heat spreader the module relies on the system's existing airflow, which is sufficient for typical POS transaction processing. The unbuffered non-ECC design adds no extra electrical load.

Behaviour under sustained load

All units are stress-tested under load before shipping to confirm stability during extended operating hours. The major OEM DRAM from Samsung, Micron or Hynix maintains rated 3200 speed without throttling in the validated POSIFLEX platform. Continuous operation stays within the specified voltage and latency envelope.

Points forts

  • 8 GB DDR4 3200 MHz boosts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX TK-2132 Stellar Series directly
  • 2Rx8 dual-rank design maximises memory bandwidth
  • Major OEM Samsung, Micron or Hynix chips ensure stability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How do I install this 260-pin SODIMM in the POSIFLEX TK-2132, and what step is often missed?

Power off the kiosk, open the memory compartment, align the notch on the 260-pin module with the slot key, press firmly until both retention clips click, then verify 3200 MT/s in BIOS.

What maintenance or replacement will this DDR4 module need during its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.20 V. Replace only if a memory diagnostic reports errors or capacity must be increased.

What limit appears first when this CL22 memory runs sustained workloads in the Stellar Series kiosk?

The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor; thermal throttling is unlikely at 1.20 V without a spreader, so latency remains the primary constraint.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.