Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 PC4-25600 ECC RDIMM 1Rx8 CL22 1.2V 288-Pin Supermicro H11SSL-NC EPYC memory upgrade

SKU CH-NAS1-33NWQ

An 8 GB DDR4 3200 ECC registered DIMM built for Supermicro H11SSL-NC EPYC motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity for server platforms
  • 3200 MT/s throughput matches EPYC memory controller specs
  • 2 V operation reduces power draw per module
  • Validated compatibility with Supermicro H11SSL-NC motherboards

Server ECC RDIMM Upgrade

This 8GB DDR4 3200 registered DIMM adds ECC-protected capacity to a Supermicro H11SSL-NC motherboard running AMD EPYC processors. The module operates at 1.2V with CL22 latency and uses a single-rank 1Rx8 organisation for broad slot compatibility.

Replaces Slower or Smaller Modules

Upgrading from lower-speed DDR4 or non-ECC unbuffered memory is worthwhile when the workload demands error correction and registered signalling for multi-DIMM stability. The jump makes sense for virtualisation hosts, database nodes or NAS appliances that hit capacity limits on the existing configuration.

Tool-Free Slot Installation

The 288-pin RDIMM seats in the standard DDR4 slot without cables or brackets; align the notch, press evenly until the retention clips engage, then verify detection in BIOS. Common issues include mixing registered and unbuffered DIMMs in the same channel or exceeding the per-channel rank limit documented in the motherboard manual.

Points forts

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity for server platforms
  • 3200 MT/s throughput matches EPYC memory controller specs
  • 2 V operation reduces power draw per module
  • Validated compatibility with Supermicro H11SSL-NC motherboards

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions sur cet article

Does the 288-pin RDIMM fit a Supermicro H11SSL-NC motherboard?

The 288-pin DDR4 RDIMM form factor matches the memory slots on the Supermicro H11SSL-NC AMD EPYC series motherboard.

What is the correct way to seat the 1Rx8 ECC registered module?

Align the notch with the slot key, press down firmly until both retention clips click, then verify the system registers 8 GB at 3200 MT/s with ECC active.

When should the module be replaced if ECC starts logging correctable errors?

Replace the stick once the platform firmware reports a rising correctable-error count that exceeds the vendor threshold, as the 1.20 V DDR4 chips cannot be serviced in place.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.