Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM CSE-510FT-203B 64GB (2x32GB) DDR5 4800 CL40 memory upgrade

SKU CH-GX16-WWE3Z MPN CSE-510FT-203B

A 64 GB dual-channel DDR5 kit with two 32 GB unbuffered UDIMMs at 4800 MT/s, CL40, 1.1 V, validated for Supermicro SYS-111AD-HN2 and X13SAZ-F platforms

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity with two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • Low 1.10 V operating voltage for efficient power use
  • CL40 CAS latency tuned for responsive system performance
  • Validated for Supermicro SuperServer SYS-111AD-HN2 compatibility

Targeted Upgrade Kit

This NEMIX RAM kit delivers 64GB of DDR5 memory across two 32GB modules. It is built for the SuperMicro IoT SuperServer SYS-111AD-HN2 and the CSE-510FT-203B platform. The modules run at 4800MHz with a CL40 latency at 1.10V. They are designed to maximise system responsiveness for compatible workstations.

Fit and Alternatives

This kit suits administrators upgrading the specified SuperMicro server or workstation with non-ECC unbuffered DDR5. Buyers who need ECC error correction or registered modules for a different platform should look elsewhere. Systems requiring a different pin count, voltage, or DDR generation are not compatible with this 288-pin UDIMM kit.

Decisive Specification

The memory operates at DDR5 4800 (PC5-38400) with a CAS latency of CL40. This speed and timing pair determines whether the modules match the motherboard's qualified vendor list. Verify that the target board supports 4800MHz non-ECC UDIMMs at 1.10V before purchasing.

Points forts

  • 64 GB total capacity with two 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • Low 1.10 V operating voltage for efficient power use
  • CL40 CAS latency tuned for responsive system performance
  • Validated for Supermicro SuperServer SYS-111AD-HN2 compatibility

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions sur cet article

Will the two 32 GB modules need any firmware updates or periodic re-seating after installation?

The kit ships as a matched pair of 2Rx8 DDR5 4800 UDIMMs tested under load, so no firmware updates or scheduled re-seating are required.

What thermal limit appears first when the CSE-510FT-203B runs at 4800 MT/s continuously?

The modules operate at the standard 1.10 V DDR5 voltage with no heat spreader, so case airflow becomes the limiting factor before the memory itself throttles.

How much extra power draw and fan noise should I expect from the 64 GB kit during all-day workloads?

Each 32 GB stick runs at 1.1 V without a spreader, adding minimal watts; chassis fans typically remain at low RPM even under sustained load.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.