Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 192GB 6x32GB 4800MHz CL40 1.1V ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-RXMG-MSEQM

Six 32 GB DDR5 RDIMM modules deliver 192 GB of registered ECC memory at 4800 MHz with CL40 timing for the Supermicro H14DST-FL

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Voir les 30 autres configurations
  • 192 GB capacity in a matched 6 × 32 GB kit for full server density
  • DDR5-4800 speed with CL40 latency runs at the board's rated frequency
  • Registered ECC architecture corrects single-bit errors and keeps every slot stable
  • 10 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL without adapters

Exact-fit DDR5 ECC RDIMM kit

This NEMIX RAM kit delivers 192 GB as six 32 GB DDR5-4800 registered ECC modules. The 2Rx8 organisation, 1.1 V operating voltage and CL40 timing match the memory controller expectations of the Supermicro H14DST-FL motherboard. It is built for servers that require registered DIMMs with error correction.

Check manual before ordering

Verify the motherboard manual for supported capacities, approved population order and any BIOS version requirements for full 192 GB operation. The board uses 288-pin RDIMM slots; UDIMM or SODIMM modules will not fit. Confirm the system can address the total capacity with all six slots populated.

Steady enterprise throughput

Registered buffering reduces electrical load on the memory controller so every slot runs at the rated 4800 MT/s when fully populated. ECC corrects single-bit errors on the fly to prevent silent data corruption during long compute runs. The 1.1 V design keeps power draw consistent under sustained workloads.

Points forts

  • 192 GB capacity in a matched 6 × 32 GB kit for full server density
  • DDR5-4800 speed with CL40 latency runs at the board's rated frequency
  • Registered ECC architecture corrects single-bit errors and keeps every slot stable
  • 10 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL without adapters

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does the 192GB kit include everything needed for a Supermicro H14DST-FL upgrade?

The kit supplies six 32GB DDR5 4800 CL40 1.10V 2Rx8 ECC registered 288-pin RDIMMs. No extra modules or accessories are required for a full 192GB installation.

Why choose the 6x32GB 192GB kit instead of a smaller capacity?

Six 32GB modules fill every slot on the H14DST-FL, giving the maximum 192GB capacity while keeping each DIMM at the board's native 4800 MT/s speed and CL40 timing.

What does the 4800 MT/s rating mean once the memory is installed in the server?

Each module operates at 4800 MT/s with CL40 latency at 1.10V, delivering the exact speed and timing the H14DST-FL memory controller expects for stable registered ECC operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.