Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 32GB (2x16GB) CL40 1.1V 1Rx8 Supermicro H13SVW-NT memory upgrade

SKU CH-TB13-KE7KR

32 GB DDR5 4800 ECC Registered RDIMM kit (2 × 16 GB, CL40, 1.1 V) validated for Supermicro H13SVW-NT motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Voir les 12 autres configurations

Speed 4800MHz

  • Exact DDR5-4800 CL40 1.10 V spec for full-speed recognition
  • Registered ECC design corrects single-bit errors preventing data corruption
  • 2 x 16 GB 1Rx8 kit matches Supermicro H13SVW-NT population rules
  • 288-pin RDIMM form factor fits the required server DIMM slots
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5-4800 ECC RDIMM kit

This 32 GB kit comprises two 16 GB DDR5-4800 registered ECC modules built to the Supermicro H13SVW-NT motherboard's exact specifications. Each stick runs at 1.1 V with CL40 timing and a 1Rx8 rank layout so the memory controller recognises the full capacity at rated speed without manual tuning.

For servers needing registered ECC stability

The registered architecture buffers address and command signals, allowing every slot to be populated while ECC corrects single-bit errors on the fly to prevent silent data corruption. Builders who need unbuffered UDIMMs, non-ECC memory, or a different DDR generation should look elsewhere because this kit fits only registered DDR5 slots.

Sustained-load behaviour with registered buffering

Under continuous workloads the registered design keeps electrical loading on the memory controller low, so all channels remain stable at the rated 4800 MT/s transfer rate. ECC operates continuously without performance penalty, catching and correcting errors before they affect running applications or trigger unexpected reboots.

Points forts

  • Exact DDR5-4800 CL40 1.10 V spec for full-speed recognition
  • Registered ECC design corrects single-bit errors preventing data corruption
  • 2 x 16 GB 1Rx8 kit matches Supermicro H13SVW-NT population rules
  • 288-pin RDIMM form factor fits the required server DIMM slots
  • Lifetime replacement warranty with US-based technical support included

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does my Supermicro H13SVW-NT motherboard need to support DDR5 4800 Registered ECC RDIMMs for this kit to work?

Yes, the board must accept 288-pin DDR5 Registered ECC modules at 1.1 V with CL40 timing; the H13SVW-NT is validated for this exact specification.

Can I keep my existing DDR5 4800 RDIMMs and add this 2×16 GB kit to the same channels?

Mixing ranks or vendors is not recommended; for stable operation populate all slots with identical 1Rx8 Registered ECC modules of the same speed and voltage.

How do I confirm the kit is running at DDR5 4800 with ECC active after installation?

Check the BIOS memory information screen — it should show 32 GB total, 4800 MT/s, CL40, 1.1 V, Registered ECC mode enabled.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.