Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM DDR5 6400 1.5TB 12x128GB CL52 1.1V 2Rx4 RDIMM ECC memory upgrade for GIGABYTE MZ33-CP1

SKU CH-8QWS-GB54V

A 1.5 TB DDR5 ECC RDIMM kit of twelve 128 GB modules running at 6400 MT/s with CL52 latency, 1.1 V and 2Rx4 registered architecture, validated for the GIGABYTE MZ33-CP1 server platform

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 5TB total capacity from twelve 128GB modules
  • DDR5 6400 speed with CL52 latency at 1.1V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation maximises density per DIMM
  • Exact-match kit validated for GIGABYTE MZ33-CP1 motherboard

Target Server Upgrade

This 1.5TB kit contains twelve 128GB DDR5 RDIMM modules built for the GIGABYTE MZ33-CP1 motherboard. It is intended for administrators who need maximum registered ECC capacity across every available slot.

Registered ECC Requirement

The motherboard requires 288-pin registered DIMMs with ECC; unbuffered or non-ECC modules will not function. This kit matches the exact 2Rx4 rank structure, 1.1V operating voltage, and CL52 timing the memory controller expects.

Full Population Install

Installing all twelve modules fills every slot, so follow the board's prescribed population order to avoid boot failure. Missing the correct sequence is the most common reason a fully populated server will not post.

Points forts

  • 5TB total capacity from twelve 128GB modules
  • DDR5 6400 speed with CL52 latency at 1.1V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation maximises density per DIMM
  • Exact-match kit validated for GIGABYTE MZ33-CP1 motherboard

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 1.5 TB kit run at the full DDR5 6400 speed once installed in the GIGABYTE MZ33-CP1?

The kit is specified for DDR5 6400 (PC5-51200) with CL52 at 1.10 V. When the motherboard memory controller accepts those exact timings, voltage and rank configuration, all twelve modules operate at the rated 6400 MT/s.

Does the 288-pin RDIMM form factor and registered ECC design match what the MZ33-CP1 motherboard expects?

Yes. The modules are 288-pin DDR5 RDIMMs with registered (buffered) architecture and on-die ECC, which is the form factor and error-correction type the MZ33-CP1 memory slots require.

What physical clearance do the twelve 128 GB modules need inside the server chassis?

Each module is a standard-height 288-pin DDR5 RDIMM without a heat spreader, so they fit the regular DIMM slot pitch and vertical space defined by the MZ33-CP1 board layout.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.