NEMIX RAM
NEMIX RAM DDR5-6400 32GB (2×16GB) CL52 1.1V ECC RDIMM Supermicro H13SRH
A 32 GB DDR5-6400 ECC RDIMM kit (2 × 16 GB) built to the exact rank, voltage and timing the Supermicro H13SRH requires
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit runs at rated speed
- 32 GB (2 × 16 GB) 1Rx8 registered ECC modules
- 10 V CL52 timing matches controller expectations
- 288-pin RDIMM form factor fits Supermicro H13SRH
- Registered buffer plus ECC prevents silent data errors
Exact-Match Server Upgrade
This NEMIX RAM kit delivers 32GB of DDR5-6400 registered ECC memory in a matched pair of 16GB modules. It is built for administrators upgrading a Supermicro H13SRH motherboard that requires 288-pin RDIMMs with a 1Rx8 rank structure. The 1.10V operating voltage and CL52 latency match the board's native memory-controller profile so the system recognises full capacity at rated speed.
Sustained Enterprise Stability
Registered architecture buffers every address and command signal, letting all populated slots run continuously at DDR5-6400 without overloading the memory controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualisation workloads. The modules operate at the standard 1.10V, keeping thermal output consistent inside dense chassis.
1Rx8 Rank Configuration
Each 16GB module uses a single-rank 1Rx8 organisation, a detail the H13SRH population rules treat differently from dual-rank alternatives. Installing the wrong rank count can halve usable capacity or prevent the system from posting. Verify the motherboard manual for approved slot order before ordering.
Points forts
- Exact-match DDR5-6400 kit runs at rated speed
- 32 GB (2 × 16 GB) 1Rx8 registered ECC modules
- 10 V CL52 timing matches controller expectations
- 288-pin RDIMM form factor fits Supermicro H13SRH
- Registered buffer plus ECC prevents silent data errors
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
How much power does the 1.10 V DDR5-6400 kit draw when the server runs continuously?
The modules operate at 1.10 V DDR5 standard voltage; total power depends on the Supermicro H13SRH memory controller load and how many slots are populated.
What motherboard slot type is required for these 288-pin RDIMMs to function?
They require DDR5 288-pin RDIMM slots on the Supermicro H13SRH; UDIMM or SODIMM sockets will not accept registered modules.
Can I mix this 1Rx8 CL52 kit with other DDR5 RDIMMs of different rank or latency in the same server?
Mixing ranks or timings is not recommended; the H13SRH memory controller expects identical 1Rx8 CL52 modules for stable full-speed operation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



