Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 6400 96GB 6x16GB ECC RDIMM 1Rx8 CL52 1.1V GIGABYTE MZ33-CP1 memory upgrade

SKU CH-CQE5-5KR02

A 96 GB DDR5 server kit of six 16 GB ECC registered RDIMMs at 6400 MHz CL52 1.1 V, validated for the Gigabyte MZ33-CP1 motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Voir les 24 autres configurations
  • 96 GB total capacity in a 6 × 16 GB kit
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • ECC and registered design corrects errors and stabilises full population
  • 288-pin RDIMM form factor built for the GIGABYTE MZ33-CP1
  • 1Rx8 rank layout matches the board's memory-controller expectations

Capacity & fit

This 96 GB kit contains six 16 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 timings and 1.1 V operation. The modules are registered ECC parts built to the exact rank and voltage the Gigabyte MZ33-CP1 motherboard expects for full-speed recognition.

Who should buy

Server administrators who need a validated, fully populated memory upgrade for the Gigabyte MZ33-CP1 will benefit from the matched kit and on-board error correction. Builders using consumer boards, laptops, or systems that require unbuffered UDIMMs or SODIMMs cannot use these registered DIMMs.

Installation notes

The 288-pin RDIMMs install vertically into the board's DDR5 slots following the population order shown in the motherboard manual. Common issues include mixing ranks or voltages, skipping the required population sequence, and forgetting to enable ECC in the BIOS after the modules are seated.

Points forts

  • 96 GB total capacity in a 6 × 16 GB kit
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • ECC and registered design corrects errors and stabilises full population
  • 288-pin RDIMM form factor built for the GIGABYTE MZ33-CP1
  • 1Rx8 rank layout matches the board's memory-controller expectations

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Must my GIGABYTE MZ33-CP1 motherboard have six free DDR5 RDIMM slots to install this 96 GB kit?

Yes, the kit contains six 16 GB modules and the board needs six available 288-pin RDIMM slots to use the full 96 GB capacity.

Can I keep any existing DDR5 RDIMMs in the other slots while adding this CL52 1Rx8 kit?

Mixing different CAS latencies, ranks or voltages is not recommended; the board will run all modules at the slowest common settings and population rules may limit capacity.

How do I confirm the kit is running at DDR5 6400 with ECC active after installation?

Check the BIOS memory information screen — it should show 6400 MT/s, CL52 timings, 1.10 V and ECC enabled for all 96 GB.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.