NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 256GB (2×128GB) CL52 1.1V 2Rx4 Supermicro H14DSG-OM
256 GB kit of two 128 GB DDR5-6400 registered ECC RDIMMs at CL52 and 1.1 V, validated for the Supermicro H14DSG-OM motherboard
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Full 256 GB capacity at DDR5-6400 with CL52 timing
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation keeps power draw low under full load
- 2Rx4 organisation enables dense 128 GB modules per slot
- Validated for Supermicro H14DSG-OM motherboard memory rules
System-Specific DDR5 Kit
This 256 GB kit contains two 128 GB DDR5 Registered ECC RDIMMs built for the Supermicro H14DSG-OM motherboard. It targets administrators who need exact-match memory that the board recognises at full capacity and rated speed.
Registered ECC 2Rx4 Configuration
Each module uses a 2Rx4 organisation with on-die ECC and a registered buffer that offloads the memory controller. The combination lets every slot run fully populated without signal degradation.
Low-Voltage 1.1 V Operation
Running at 1.1 V reduces power draw and heat output compared with higher-voltage DDR5 server DIMMs. The modules ship without heat spreaders, relying on the chassis airflow that Supermicro platforms already provide.
Points forts
- Full 256 GB capacity at DDR5-6400 with CL52 timing
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation keeps power draw low under full load
- 2Rx4 organisation enables dense 128 GB modules per slot
- Validated for Supermicro H14DSG-OM motherboard memory rules
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Will the DDR5 6400 speed run at full rate on my Supermicro H14DSG-OM?
The kit is spec-matched to the H14DSG-OM memory controller, so the 6400 MT/s rating is recognised and sustained when all slots are populated per the board's population rules.
Does the registered ECC design change how the memory controller behaves?
Registered buffering offloads the controller, allowing every slot to run fully populated at 256 GB total while ECC corrects single-bit errors on the fly to prevent silent data corruption.
What physical slot and keying does this 288-pin RDIMM need?
It requires a standard 288-pin DDR5 RDIMM slot; the module has no heat spreader, so it fits the H14DSG-OM DIMM sockets without clearance issues.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



