NEMIX RAM
NEMIX RAM DDR5 64GB (2x32GB) 6400MHz CL52 2Rx8 ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade
64 GB DDR5-6400 ECC registered RDIMM kit (2×32 GB, CL52, 1.1 V) validated for Supermicro H14DSG-O-CPU
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact 64 GB DDR5-6400 kit matches Supermicro H14DSG-O-CPU specs
- Registered ECC RDIMM architecture prevents silent data corruption
- 2Rx8 dual-rank design enables full-capacity population
- 1 V DDR5 voltage reduces server power draw
- Lifetime replacement warranty with US-based technical support
Supermicro H14DSG-O-CPU DDR5 upgrade
This 64 GB kit is built specifically for the Supermicro H14DSG-O-CPU motherboard. It delivers two 32 GB DDR5-6400 registered ECC modules that the board recognises at full rated speed without manual tuning.
Capacity and registered headroom
Two 32 GB 2Rx8 RDIMMs give 64 GB total while the registered architecture buffers each command so every slot can stay populated at the full 6400 MT/s data rate. ECC corrects single-bit errors on the fly, preventing silent data corruption during sustained workloads; the limit is the board's maximum supported capacity per slot and per channel.
Build and daily fit
Modules use a standard 288-pin RDIMM form factor with no heat spreader, so they sit flush in dense server chassis where taller heatsinks would block airflow. Major OEM Samsung, Micron or Hynix DRAM ensures consistent supply and binning. Always verify the motherboard manual for approved population order before installation.
Points forts
- Exact 64 GB DDR5-6400 kit matches Supermicro H14DSG-O-CPU specs
- Registered ECC RDIMM architecture prevents silent data corruption
- 2Rx8 dual-rank design enables full-capacity population
- 1 V DDR5 voltage reduces server power draw
- Lifetime replacement warranty with US-based technical support
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
Will the 2Rx8 Registered ECC DDR5-6400 kit be recognised at full 64GB capacity when installed in the Supermicro H14DSG-O-CPU?
The kit matches the board's required 288-pin RDIMM form factor, 2Rx8 rank, 1.1V voltage and CL52 timing so the memory controller registers the full 64GB at the rated 6400 speed.
How can I verify the modules are running at DDR5-6400 with ECC active after installation?
Check the BIOS memory information screen or use a tool such as dmidecode; it should report 6400 MT/s, CL52, 1.1V and ECC enabled for each 32GB DIMM.
What is included in the package and do I need any extra parts to install it?
The box contains the 64GB 2x32GB DDR5-6400 CL52 2Rx8 1.1V 288-pin ECC Registered RDIMM kit; no additional components are required for installation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



