Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two bare green DDR5 ECC UDIMM sticks 32GB kit

NEMIX RAM

NEMIX RAM DDR5 ECC UDIMM 32GB (2x16GB) 5600 CL46 Supermicro X14SAE-F

SKU CH-SCX7-KA8Z4

32 GB dual-channel DDR5 ECC UDIMM kit running at 5600 MHz with CL46 latency and 1.1 V operation for the Supermicro X14SAE-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • Error-correcting ECC prevents silent data corruption and crashes
  • Exact-match 32GB kit runs at full DDR5 5600 speed without tuning
  • Verified fit for Supermicro X14SAE-F motherboard with 288-pin UDIMM form factor
  • Low 1.1V operation reduces power draw and heat in dense server builds
  • Lifetime replacement warranty with US-based technical support included

Exact-fit DDR5 ECC kit for Supermicro X14SAE-F

This 32 GB kit delivers two 16 GB DDR5 5600 modules built to the board's 1Rx8 unbuffered ECC specification. The precise rank, voltage and CL46 timing ensure the memory controller recognises full capacity at rated speed. It targets administrators and builders who need validated, error-correcting memory for this specific platform.

DDR5 5600 sets the practical ceiling for this

The X14SAE-F memory controller tops out at DDR5 5600 (PC5 44800) with 1.10 V operation, so faster modules will simply downclock. Unbuffered ECC UDIMMs are the only form factor the board accepts; registered or SODIMM variants will not fit or function. Population rules in the manual dictate which slots fill first.

Replaces slower or non-ECC DDR5 on the same board

Moving from lower-speed DDR5 or non-ECC modules to this CL46 5600 kit adds single-bit error correction and the highest native data rate the platform supports. The jump is worth it when workloads demand maximum throughput with data-integrity protection. Systems already running validated 5600 ECC UDIMMs gain no further benefit from this kit.

Points forts

  • Error-correcting ECC prevents silent data corruption and crashes
  • Exact-match 32GB kit runs at full DDR5 5600 speed without tuning
  • Verified fit for Supermicro X14SAE-F motherboard with 288-pin UDIMM form factor
  • Low 1.1V operation reduces power draw and heat in dense server builds
  • Lifetime replacement warranty with US-based technical support included

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Should I pick the 2x16GB kit or a single 32GB module for my Supermicro X14SAE-F?

The kit supplies two 16GB UDIMMs totalling 32GB; the board expects DDR5 ECC unbuffered 288-pin modules at 1.1V, so this matched pair satisfies the population rules.

What does the 5600MHz rating mean once the kit is installed in the X14SAE-F?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.10V, delivering the exact speed and timing the motherboard's memory controller is validated for.

Is the 288-pin DDR5 ECC UDIMM interface the one my board requires, and what does it cap?

Yes — the X14SAE-F takes 288-pin DDR5 ECC unbuffered UDIMMs; the interface limits operation to DDR5-5600 at CL46 with 1Rx8 organisation and 1.1V.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.