Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
A green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD17000-418K1 4GB DDR4 2133 CL15 memory upgrade

SKU CH-B339-14T50

Adds 4 GB of DDR4 2133 CL15 memory at 1.2 V via 288-pin UDIMM for Hynix-compatible systems

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system specifications
  • CL15 latency keeps data access snappy
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop slots

System-specific DDR4 upgrade

This NEMIX RAM module adds 4 GB of DDR4 2133 memory to compatible Hynix-based desktops. It uses a single 288-pin UDIMM running at 1.2 V with CL15 latency and a 1Rx8 rank configuration.

Thermals and power in daily use

The stick operates at the standard 1.20 V DDR4 voltage without a heat spreader. Unbuffered, non-ECC design keeps power draw low and noise non-existent during typical desktop workloads.

Replaces slower or smaller DDR4 DIMMs

Swapping out a lower-capacity or lower-frequency DDR4 module for this 4 GB PC4-17000 unit is worthwhile when the board supports 2133 MT/s and the system needs a simple capacity boost. It does not suit builds requiring ECC, registered memory or speeds above 2133 MT/s.

Points forts

  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system specifications
  • CL15 latency keeps data access snappy
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop slots

Caractéristiques

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-418K1
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx6 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

Questions sur cet article

How do I install this 288-pin DDR4 UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, then verify the system sees 4 GB at 2133 MHz in BIOS.

What maintenance or replacement will this 1.2 V non-ECC module need later?

No scheduled maintenance is required; if errors appear, replace the stick — there are no user-serviceable parts.

What limit appears first when this CL15 2133 MHz kit runs sustained workloads?

The JEDEC 1.2 V voltage ceiling and CL15 latency bound throughput before thermal throttling becomes a factor.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.