Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small black 25mm square fan with two wires

OEM Industries

OEM Industries DFB251005L 25mm 12V 2-Wire Ball Bearing Fan

SKU CH-YWG7-32PE8

A 25 mm ball-bearing fan runs on 12 V at 0.04 A and 0.5 W with a two-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size25mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • Compact 25 mm frame fits tight chipset or drive bays
  • Ball bearing ensures long-life, low-friction rotation
  • 12 V, 0.04 A draw keeps power use minimal
  • 5 W rating suits low-heat component cooling
  • Two-wire lead simplifies direct board connection

Compact 25mm Cooling Fan

The OEM Industries DFB251005L is a 25mm square fan that runs on 12V DC and draws 0.04A for a rated 0.5W. It uses a two-wire power connector and a ball bearing for continuous operation in tight spaces such as chipset heatsinks or hard-drive brackets.

Ideal for Small-Form-Factor Repairs

This unit suits technicians replacing a noisy or failed 25mm fan on a motherboard chipset, a RAID card or a compact storage enclosure. Builders who need PWM speed control, a three- or four-pin header, or higher airflow for a CPU tower should look elsewhere.

Simple Two-Wire Installation

Connect the red and black leads to a 12V source or a two-pin header; polarity must be observed to avoid damage. The tiny frame leaves little room for error, so verify the mounting hole pattern and clearance before ordering.

Points forts

  • Compact 25 mm frame fits tight chipset or drive bays
  • Ball bearing ensures long-life, low-friction rotation
  • 12 V, 0.04 A draw keeps power use minimal
  • 5 W rating suits low-heat component cooling
  • Two-wire lead simplifies direct board connection

Caractéristiques

ModelDFB251005L
ColorBlack
TypeFan only
Fan Size25mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Questions sur cet article

Does this 25 mm fan need a 12 V header or a separate 12 V supply?

It runs on 12 V DC at .04 A, so a standard 12 V fan header or equivalent 12 V source is required.

Will the 2-wire connector work with a motherboard header that expects a 3- or 4-pin PWM fan?

The fan has only two wires for power; it will spin at full speed on a 3- or 4-pin header but cannot report RPM or accept PWM control.

How can I confirm the ball-bearing fan is running correctly after installing it on a chipset or hard-drive bracket?

Listen for smooth, steady airflow at 12 V; the ball bearing should run quietly without rattling, and the .5 W draw matches the spec.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.