OWC
OWC 4GB DDR3L 1600 PC3L-12800 CL11 2Rx8 SODIMM memory upgrade
4GB DDR3L 1600 SODIMM upgrade for QNAP TBS-453A and TS-1253 series NAS
- Capacity4GB
- Type204-Pin DDR3L Non-ECC SODIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 4GB capacity expands multitasking headroom on compatible QNAP NAS
- DDR3L 1600 CL11 speed matches PC3L-12800 system spec
- 35 V low-voltage DDR3L reduces power draw and heat
- 204-pin SODIMM form factor fits TBS-453A and TS-1253 series slots
- JEDEC and RoHS compliant for warranty-safe upgrade confidence
QNAP NAS 4GB DDR3L Upgrade
This OWC module adds 4GB of DDR3L memory to compatible QNAP NAS units. It runs at 1600MHz with CL11 latency and operates at 1.35V. The 204-pin SODIMM format fits the listed QNAP TBS-453A and TS-1253 series models directly.
Suitable for expanding listed QNAP models.
Builders upgrading a QNAP TBS-453A, TS-1253BU, TS-1253BU-RP, TS-1253U or TS-1253U-RP can install this module without configuration changes. Buyers whose NAS requires a different pin count, voltage or DDR generation should select a module matching those specifications.
204-pin DDR3L SODIMM at 1.35V
The decisive specification is the 204-pin DDR3L SODIMM interface running at 1.35V. Only systems designed for this exact form factor and voltage will accept the module; all other platforms are physically or electrically incompatible.
Points forts
- 4GB capacity expands multitasking headroom on compatible QNAP NAS
- DDR3L 1600 CL11 speed matches PC3L-12800 system spec
- 35 V low-voltage DDR3L reduces power draw and heat
- 204-pin SODIMM form factor fits TBS-453A and TS-1253 series slots
- JEDEC and RoHS compliant for warranty-safe upgrade confidence
Caractéristiques
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | QNAP TBS-453A QNAP TS-1253BU QNAP TS-1253BU-RP QNAP TS-1253U QNAP TS-1253U-RP |
Questions sur cet article
Does my NAS need a free 204-pin SODIMM slot to install this module?
Yes, the 4 GB DDR3L stick uses the standard 204-pin SO-DIMM form factor and fits any vacant slot in the compatible QNAP models.
Will this 1.35 V DDR3L module run correctly in a system that currently uses 1.5 V DDR3 memory?
The module operates at 1.35 V and is designed for DDR3L platforms; mixing voltages is not recommended for the listed QNAP units.
How can I verify the 1600 MHz CL11 speed is active after installation?
Check the system information or resource monitor in the QNAP OS; it will report the installed memory running at PC3L-12800 1600 MHz with CL11 timing.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



