Patriot Memory
Patriot Memory PSD22G800K 2GB (2 x 1GB) DDR2 800 desktop RAM
A 2GB dual-channel DDR2 800 kit with CL5 latency and 1.80V operation for desktop upgrades
- Capacity2GB (2 x 1GB)
- SpeedDDR2 800 (PC2 6400)
- CAS LatencyCL5
- Voltage1.80V
- Heat SpreaderNo
- FeaturesRoHS Compliant Auto and self refresh capability
- DDR2 800 speed boosts legacy system responsiveness
- CL5 latency tightens data access timing
- 80 V operation reduces power draw
- 2 GB dual-channel kit expands multitasking headroom
- RoHS compliant build meets environmental standards
2GB DDR2 800 Dual-Channel Kit
This Patriot Signature Line kit provides 2GB of desktop memory as two matched 1GB modules. It runs at DDR2 800 (PC2 6400) with CAS latency CL5 and 1.80V. The modules are RoHS compliant and designed for DDR2-based systems.
Suits DDR2 upgrades, not higher-density needs
Builders restoring or upgrading older DDR2 platforms will find the rated speed and latency match the specification. Systems that need more than 2GB total capacity or require a different memory generation should look at other options.
DDR2 800 (PC2 6400) speed rating
The decisive specification is the DDR2 800 (PC2 6400) speed rating. The motherboard and chipset must support this exact DDR2 standard for the kit to operate at its tested 800MHz CL5 timing.
Points forts
- DDR2 800 speed boosts legacy system responsiveness
- CL5 latency tightens data access timing
- 80 V operation reduces power draw
- 2 GB dual-channel kit expands multitasking headroom
- RoHS compliant build meets environmental standards
Caractéristiques
| Brand | Patriot |
|---|---|
| Model | PSD22G800K |
| Capacity | 2GB (2 x 1GB) |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| Heat Spreader | No |
| Features | RoHS Compliant Auto and self refresh capability |
| Poids d’expédition | 0.14 kg |
| Dimensions du colis | 180 × 120 × 16 mm |
Questions sur cet article
Does this DDR2 800 (PC2 6400) kit need a motherboard that supports DDR2 800 speeds?
Yes, the motherboard must accept DDR2 memory and be able to run at 800 MHz; the modules operate at 1.80 V with CL5 timings.
Will these CL5 DDR2 800 modules down-clock to match slower DDR2 memory already installed?
The kit is rated for 800 MHz at CL5; if paired with slower DDR2 modules the system will typically run all memory at the lowest common speed and latency.
How can I confirm the kit is running at its rated 800 MHz CL5 after installation?
Enter the BIOS or use a system-information tool to verify the memory frequency shows 800 MHz and the CAS latency reads 5.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



