Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Three black 120mm ARGB case fans with thick 28mm frames and dual-halo lighting

PCCOOLER

PCCOOLER F7 X120 ARGB 120mm case fan 3-pack Black

SKU CH-XVA0-SSWQR

A 120 mm three-pack with 28 mm thick frames, dual ball bearings and wireless ARGB, delivering up to 83 CFM and 5.7 mmH₂O at 3000 RPM

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeDual Ball Bearing
  • RPML:500~1500RPM±10% M:500~2200RPM±10% H:500~3000RPM±10%
  • Air FlowL:55CFM M:65CFM H:83CFM

Color Black

  • Three fans in one pack for balanced case cooling
  • 28 mm thick frame pushes up to 83 CFM at high speed
  • Three preset modes from 500 to 3000 RPM for any workload
  • Dual ball bearing plus 3-phase 6-slot motor for smooth long-life operation
  • Wireless contact design with 24 ARGB LEDs syncs via 5 V 3-pin header

Three-pack for balanced airflow

The PCCOOLER F7 X120 ARGB arrives as a 3-pack of 120mm case fans built for builders who want coordinated cooling and lighting without mixing single units. Each fan uses a 4-pin PWM connector so the motherboard can regulate speed automatically across the full 500-3000 RPM range. The set suits mid-tower and full-tower cases that have three 120mm mounting positions available.

28mm thick frame with wireless ARGB

A thickened 28mm frame holds wide-span variable-section blades and a three-phase six-slot motor that reduces vibration at high speed. Glass-fibre reinforced PBT blades resist deformation under sustained load. Dual ball bearings support vertical or horizontal mounting without premature wear. Wireless contact pads replace traditional ARGB cables, cutting clutter while the dual-halo ring with 24 LEDs syncs via a standard 5V 3-pin motherboard header.

Three preset curves up to 33.1 dBA

Quiet mode caps the fans at 1500 RPM for 55 CFM and 1.7 mmH2O at 15-22.3 dBA. Balanced mode raises the limit to 2200 RPM delivering 65 CFM and 3.3 mmH2O at 15-28.9 dBA. Performance mode unlocks the full 3000 RPM for 83 CFM and 5.7 mmH2O at 15-33.1 dBA. The 15 dBA floor means the fans are near-silent at idle regardless of the selected profile.

Points forts

  • Three fans in one pack for balanced case cooling
  • 28 mm thick frame pushes up to 83 CFM at high speed
  • Three preset modes from 500 to 3000 RPM for any workload
  • Dual ball bearing plus 3-phase 6-slot motor for smooth long-life operation
  • Wireless contact design with 24 ARGB LEDs syncs via 5 V 3-pin header

Caractéristiques

BrandPCCOOLER
SeriesF7
ModelF7 X120 ARGB BK 3IN1
Part NumberF7X120-BKAC336-GL
Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeDual Ball Bearing
RPML:500~1500RPM±10%
M:500~2200RPM±10%
H:500~3000RPM±10%
Air FlowL:55CFM
M:65CFM
H:83CFM
Noise LevelL:15~22.3 dBA
M:15~28.9 dBA
H:15~33.1dBA
Power Connector4-pin PWM
ColorBlack
CompatibilityCase
Fan Counts3 Fans
Fan Thickness28mm
Air PressureL:1.7mmH2O
M:3.3mmH2O
H:5.7mmH2O
Dimensions120x120x28mm

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What does the 4-pin PWM connector control on these fans?

The 4-pin PWM connector provides power and speed signalling so the motherboard can regulate each fan between 500 and 3000 RPM across the three preset modes.

Will the 28 mm thick frames fit in a standard 120 mm mounting grid?

Yes, each fan measures 120 x 120 x 28 mm, so they occupy the standard 120 mm square footprint while adding 28 mm of depth inside the case.

How do I sync the ARGB lighting without a separate controller?

Connect the 5 V 3-pin ARGB header from the wireless contact hub to a compatible motherboard header and control the 24 LEDs per fan through the board's RGB software.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.