Peladn 1600W Full Modular Mining Power Supply

Mining power supply for six GPU rigs

This 1600 W ATX unit is built for cryptocurrency mining rigs that run up to six graphics cards. Full modular cabling lets you connect only the leads you need. The 80 Plus Gold rating delivers 85 percent efficiency at 110 V and 88 percent at 220 V. Active PFC and a dual 12 V rail design keep voltage stable under continuous load.

Fits standard ATX cases with 135 mm cooling

The housing measures 165 by 150 by 85 mm and uses a 135 mm fan with automatic speed control. An I/O switch on the rear cuts power without unplugging the cord. All cables are 500 mm long; SATA and Molex leads also include 650 mm and 800 mm branches for distant drives. A 24 pin shorting jumper is required if the motherboard connector is unused.

1488 W on the 12 V rail with six PCIe connectors

The 12 V rail supplies 124 A for a combined 1488 W, enough for six 6+2 pin GPU feeds. Minor rails provide 15 A each on 3.3 V and 5 V with 125 W combined, plus 3 A on 5 V standby and 0.5 A on -12 V. The unit operates on 110 to 240 V input but is rated for 220 V only.