PNY Technologies, Inc.
PNY Technologies, Inc. GeForce GTX 1060 3GB XLR8 Twin Fan graphics card
Factory-overclocked GTX 1060 with 3GB GDDR5, 1280 CUDA cores and twin-fan cooling for 1080p gaming
- DisplayPort3 x DisplayPort 1.4a
- DVI1 x DVI
- HDMI1 x HDMI
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce GTX 10 Series
- GPUGeForce GTX 1060
- Factory overclocked core reaches 1797 MHz boost for higher frame rates
- Twin-fan XLR8 cooler keeps the 120 W TDP GPU running quietly
- 1280 CUDA cores on 3 GB GDDR5 deliver solid 1080p gaming performance
- PCIe 3.0 x16 interface plus three DisplayPort 1.4, HDMI 2.0 and DVI drive four displays
- 8-pin power connector with 450 W PSU recommendation simplifies system integration
PNY XLR8 GTX 1060 3GB graphics card
The PNY XLR8 GeForce GTX 1060 3GB is a factory-overclocked graphics card built for 1080p gaming. It uses the Pascal architecture with 1280 CUDA cores, 3GB of GDDR5 memory on a 192-bit bus, and a Twin Fan cooler. The card connects via PCI Express 3.0 x16 and draws 120W TDP through an 8-pin power connector.
Upgrade from GTX 10-series 3GB or older GPUs
This card replaces GTX 10-series 3GB or older GPUs when higher clocks and dual-fan cooling matter. The core runs at 1582 MHz with a 1797 MHz boost, while memory operates at 8 Gbps effective. A 500W system power supply is the minimum requirement, with 450W noted for the card itself. The jump is worth it for smoother frame rates in DirectX 12 and OpenGL 4.5 titles.
Suits 1080p gamers on a 500W supply
This model suits 1080p gamers on a 500W supply who need DisplayPort 1.4, HDMI 2.0b, and DVI outputs for up to four monitors. It supports a maximum resolution of 7680 x 4320 and features NVIDIA Ansel, G-SYNC, and SLI with HB Bridge. Users needing more than 3GB VRAM or a lower TDP should look at something else.
Points forts
- Factory overclocked core reaches 1797 MHz boost for higher frame rates
- Twin-fan XLR8 cooler keeps the 120 W TDP GPU running quietly
- 1280 CUDA cores on 3 GB GDDR5 deliver solid 1080p gaming performance
- PCIe 3.0 x16 interface plus three DisplayPort 1.4, HDMI 2.0 and DVI drive four displays
- 8-pin power connector with 450 W PSU recommendation simplifies system integration
Caractéristiques
| DisplayPort | 3 x DisplayPort 1.4a |
|---|---|
| DVI | 1 x DVI |
| HDMI | 1 x HDMI |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce GTX 10 Series |
| GPU | GeForce GTX 1060 |
| Brand | PNY |
| Series | XLR8 |
| Interface | PCI Express 3.0 x16 |
| Memory Size | 3GB |
| Cooler | Double Fans |
| Thermal Design Power | 120W |
Questions sur cet article
Will the dual-slot cooler and 8-pin power connector fit in a standard ATX case with a 450 W supply?
The card uses a dual-slot XLR8 Twin Fan cooler and draws power through a single 8-pin connector; the manufacturer recommends a 450 W system supply for the 120 W TDP.
Which slot and power cable are needed to install the PCI Express 3.0 x16 card?
Insert the card into a PCI Express 3.0 x16 slot and attach one 8-pin power cable from the PSU; the step often missed is connecting that 8-pin before closing the case.
When should the twin fans or thermal paste be serviced on the 120 W GPU?
Clean the twin fans with compressed air every few months; replace thermal paste only if temperatures rise above normal after several years of use.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock