PUSKILL
PUSKILL 8gb 8GB DDR3 1333/1600MHz CL11 240-pin desktop RAM
Single 8 GB DDR3 desktop module running at 1333 or 1600 MHz with CL11 latency and 240 pins
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- ECCNo
- Heat SpreaderNo
- 8GB capacity lets you run more applications at once
- DDR3 1600 speed (PC3 12800) delivers responsive data throughput
- CL11 latency keeps access times tight
- 240-pin DIMM fits standard desktop motherboards
- Single 8GB module simplifies installation and leaves slots free
Capacity and fit
This PUSKILL module provides 8 GB of DDR3 memory on a single 240-pin DIMM. It is intended for desktop owners who need a straightforward capacity increase for everyday workloads.
Speed step from 1333 MHz
The stick runs at 1600 MHz (PC3-12800) with CL11 timings and will down-clock to 1333 MHz if the platform requires it. The jump is worth it when the motherboard and CPU officially support 1600 MHz operation.
Voltage and slot check
Verify that the board accepts 1.5 V DDR3 DIMMs and has a free 240-pin slot before ordering. Systems limited to 1.35 V low-voltage memory or to a lower maximum density per slot will not be compatible.
Points forts
- 8GB capacity lets you run more applications at once
- DDR3 1600 speed (PC3 12800) delivers responsive data throughput
- CL11 latency keeps access times tight
- 240-pin DIMM fits standard desktop motherboards
- Single 8GB module simplifies installation and leaves slots free
Caractéristiques
| Capacity | 8GB |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| ECC | No |
| Heat Spreader | No |
Questions sur cet article
Will this 240-pin DDR3 module fit my desktop's memory slots?
Yes, the 240-pin DDR3 form factor matches standard desktop DIMM slots for this memory type.
Do I need to change any BIOS settings to run the RAM at 1600MHz instead of 1333MHz?
The module runs at 1333MHz by default; enable the XMP or DOCP profile in BIOS to select the 1600MHz speed with CL11 timings.
Should I add a heatsink to this module since it has no heat spreader?
No heatsink is required; the module operates at standard 1.5V without a spreader and stays within safe temperatures under normal desktop loads.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



