Replace Power
Replace Power 420W ATX PSU for Liteon PS-5251-08
A 420 W ATX replacement unit with a single fan for Liteon PS-5251-08 models
- ColorGrey
- TypeATX
- Fans1
- Weight0.1
- Delivers 420 W continuous power for stable system operation
- Single 12 V rail rated at 16 A supports demanding components
- 20+4 pin ATX and 12 V connectors fit Dell Liteon PS-5251-08 replacements
- Input range 115 / 230 V at 50/60 Hz suits global mains supply
- Hold-up time of 17 ms maintains output during brief power dips
Direct Replacement for Liteon PS-5251-08
This Replace Power unit is a 420W ATX supply built to match the Liteon PS-5251-08 and part numbers 441390-001 and 440569-001. It fits the same reduced-depth chassis and uses a single fan in a grey housing. The 20+4 pin main connector and +12V rail deliver 16A to the board.
Upgrade from a Failing Original Unit
When the factory supply becomes noisy, overheats or can no longer hold voltage, this 420W module restores stable output. It accepts 115 or 230V input at 50 or 60Hz and provides 3.3V at 13A, 5V at 13A, -12V at 0.8A, -5V at 0.5A and 5VSB at 2.5A. Rise time stays below 70ms with a minimum 17ms hold-up time.
Fits Existing Mounting Points and Cabling
The reduced-depth form factor slides into the original bracket without modification. Single-rail +12V delivery simplifies load balancing across the harness. Grey finish matches the OEM aesthetic. Builders who need more than 420W or additional PCIe connectors for discrete graphics cannot use this unit.
Points forts
- Delivers 420 W continuous power for stable system operation
- Single 12 V rail rated at 16 A supports demanding components
- 20+4 pin ATX and 12 V connectors fit Dell Liteon PS-5251-08 replacements
- Input range 115 / 230 V at 50/60 Hz suits global mains supply
- Hold-up time of 17 ms maintains output during brief power dips
Caractéristiques
| Brand | Replace Power |
|---|---|
| Model | N/A |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Questions sur cet article
Will the reduced-depth 420W ATX unit fit the same mounting holes as the original Liteon PS-5251-08?
Yes, the replacement is built to the standard ATX form factor so it uses the same four mounting holes as the Liteon PS-5251-08 it replaces.
What is the most common mistake when installing this PSU into a Dell chassis that used the 441390-001?
Forgetting to seat the 20+4 pin main connector and the separate +12V connector fully; both must click into place before powering on.
The label shows a single 12V rail rated at 16A — does that rail ever need servicing or replacement?
No, the internal rail is solid-state and maintenance-free; only the single cooling fan may need cleaning or replacement after extended use.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



