Replace Power
Replace Power 510-P030XT ATX power supply
ATX power supply with 20+4 pin, 12V 4-pin, 6-pin and three SATA connectors for HP Pavilion 510-P030XT
- ColorGrey
- TypeATX
- Fans1
- Weight1
- Direct replacement for HP Pavilion 510-P030XT desktop
- 20+4 pin ATX connector powers the motherboard
- 4-pin +12V connector feeds the CPU
- Three SATA connectors drive storage devices
- 6-pin power connector supports graphics cards
Replacement PSU for HP Pavilion 510-P030XT
This Replace Power unit is built as a direct swap for the original power supply in the HP Pavilion Desktop 510-P030XT. It delivers standard ATX power in a grey chassis with a single cooling fan. The unit weighs one kilogram and carries the Replace Power brand.
Connectors for motherboard drives and graphics
A 20+4 pin ATX connector feeds the main board while a +12V 4-pin plug supplies the CPU. Three SATA connectors and one 6-pin power connector are provided for storage drives and a discrete graphics card. The single fan handles airflow for typical desktop loads.
Upgrade from a failed or underpowered original
This PSU replaces a unit that has failed or cannot support added components such as a dedicated GPU. The 6-pin connector makes that upgrade possible where the factory supply lacked it. Buyers who need more SATA ports or higher total wattage than this model provides should look elsewhere.
Points forts
- Direct replacement for HP Pavilion 510-P030XT desktop
- 20+4 pin ATX connector powers the motherboard
- 4-pin +12V connector feeds the CPU
- Three SATA connectors drive storage devices
- 6-pin power connector supports graphics cards
Caractéristiques
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 1 |
Questions sur cet article
What does the 20+4 pin ATX connector power on this unit?
The 20+4 pin ATX connector supplies the motherboard main power rail for the HP Pavilion 510-P030XT desktop.
What clearance does the single fan and grey ATX chassis require inside the case?
The grey ATX chassis with one fan fits standard ATX bays in the HP Pavilion 510-P030XT; allow space for the fan exhaust at the rear.
Which cables must be connected first when installing this replacement PSU?
Connect the 20+4 pin ATX cable and the +12V 4-pin CPU cable to the motherboard before attaching the three SATA and single 6-pin peripheral leads.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PNY Technologies, Inc. VCNRTX4000ADALP-PB RTX 4000 Ada 20GB GDDR6 workstation graphics card
- PCI Express 4.0 x16
- NVIDIA



