Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Grey ATX power supply unit with single fan

Replace Power

Replace Power AP-MPS3ATX30-30 300W ATX power supply

SKU CH-WD36-PSPYD MPN AP-MPS3ATX30-30

A 300 W ATX power supply with 20+4-pin, 4-pin ATX12V, three SATA, two peripheral and one floppy connector, plus over-voltage protection

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 300W steady output powers desktop builds reliably
  • High efficiency design reduces wasted energy and heat
  • Low ripple and noise protects sensitive components
  • Over-voltage protection guards hardware from power spikes
  • Multiple connectors including SATA support varied drive configurations

300W ATX replacement unit

This 300W ATX power supply replaces the Sparkle FSP300-60PLN in compatible desktop systems. It provides a direct swap for ageing or failed units in office PCs and basic workstations. The grey enclosure houses a single cooling fan. Builders needing higher wattage or modular cabling should look elsewhere.

Sustained 300W output with protection

The unit delivers a steady 300W stream rather than a short burst rating. High efficiency and low ripple and noise keep voltage stable during extended workloads. Output over-voltage protection guards connected components if the regulation loop drifts. Continuous operation at full load is supported within the design limits.

Fixed cable set with legacy connectors

A 20+4-pin ATX connector and a 4-pin ATX12V connector power the motherboard and CPU. Two peripheral connectors, one floppy connector and three SATA connectors cover drives and older accessories. All cables are fixed, so unused leads remain inside the case. The compact 0.1kg chassis fits standard ATX mounting points.

Points forts

  • 300W steady output powers desktop builds reliably
  • High efficiency design reduces wasted energy and heat
  • Low ripple and noise protects sensitive components
  • Over-voltage protection guards hardware from power spikes
  • Multiple connectors including SATA support varied drive configurations

Caractéristiques

BrandReplace Power
ModelAP-MPS3ATX30-30
ColorGrey
TypeATX
Fans1
Weight0.1

Questions sur cet article

How much heat and noise should I expect from the single fan when the 300W unit runs all day?

The single fan cools the 300W unit; with high efficiency and low ripple and noise the unit stays quiet under typical desktop loads.

Which motherboard power connectors must my board already provide for this PSU to work?

Your board needs a 20+4-pin ATX socket and a 4-pin ATX12V socket; the PSU also includes two peripheral, one floppy and three SATA power connectors for drives.

Will the 20+4-pin ATX and 4-pin ATX12V connectors fit an older motherboard that only has a 20-pin and a 4-pin socket?

Yes, the 20+4-pin plug splits to match a 20-pin socket and the 4-pin ATX12V connector fits the older 4-pin header directly.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.